PDA

View Full Version : Immo PIN for Seat Ibiza 6J 2009



zenkovik
21st May, 2013, 09:15 AM
I'm in need of adding an extra key to Seat Ibiza 6J (2009), but only own a VCDS interface and need the Immo PIN code. How do I get it/read it/extract it?

I've looked around, and it looks like VagTacho5.0 seems to be the right tool IF my Ibiza has NEC MCU + 24C32 EEPROM. So... How do I find out if it has this thing inside? Can I query the car with VCDS to check for this NEC thing? Or maybe check by VIN, or any other way?

Thanks!

potatodog
21st May, 2013, 03:23 PM
Post scan from car with VCDS and i will tell you what is inside dashboard.
BUT: you can not adapt a new key by Pin with VCDS for this car

zenkovik
21st May, 2013, 04:59 PM
Thanks for the reply! The log is here: done it's job, so removing - it's like 2 months old, but the parts didn't change since then.

Do you know what I need to add the mentioned extra key? I've already bought the precoded (TP22) Megamos ID48 transponder and was looking to add the key with VCDS as soon as I get the PIN, but it looks like I've gathered some bad info. Very bad info ;p

Do you know which immo exactly is it? I've came to the wrong conclusion that it's immo4 - the one which ross-tech labels as "adaptive" one.

keygargoil
22nd May, 2013, 01:44 AM
your tp22 where did you buy it from as the newer nec type clocks need 12 bytes of cs using a normal id48 (nec) tp22 is for micronas clocks

potatodog
22nd May, 2013, 05:56 AM
Your dash have NEC 24C32.
I don't know as VAGTacho work on this dash, but AVDI with Tag Key Tool work 100% to programm new key. Use blank ID48 Transponder.

zenkovik
22nd May, 2013, 09:11 AM
Your dash have NEC 24C32.
I don't know as VAGTacho work on this dash, but AVDI with Tag Key Tool work 100% to programm new key. Use blank ID48 Transponder.Thank you very much for the info!


your tp22 where did you buy it from as the newer nec type clocks need 12 bytes of cs using a normal id48 (nec) tp22 is for micronas clocksUmm... I've bought it locally (Poland) - I asked specifically for a transponder for Ibiza 6J 2009, and the seller said that Megamos ID48 will work, but it needs precoding - so I ordered a precoded one (TP22 - Seat). I'll have to see if precoding will force me to get another transponder, but luckily those aren't too expensive.

Thanks again!

Maartinj
22nd May, 2013, 09:55 AM
your tp22 where did you buy it from as the newer nec type clocks need 12 bytes of cs using a normal id48 (nec) tp22 is for micronas clocks

Megamos 48 can be precode for NEC since 2009 or Micronas sice 2003-2009 cluster.