PDA

View Full Version : 77960-SZA-A012-M1



Air
21st May, 2013, 09:37 PM
Hi folks
I did but no luck on this module

Honda Pilot'09 USA
77960-SZA-A012-M1
Eeprom RA86

Every time I see the same error: OPDS module error. I use dealer level scan tool to calibrate it but scanner say me NO Communication with this module at the end of procedure. While I can communicate to this module directly with my scanner. What is the problem. I think I clear in wrong way or original dump was distroyed. Any help please

Zeittt
21st May, 2013, 10:50 PM
Hi

Try and report
pass pm

Air
22nd May, 2013, 03:04 AM
Hi

Try and report
pass pm

Thanks, I already did like this, but I got module error code. Any more idea???

badenaleks
22nd May, 2013, 11:01 AM
Pass in PM

Air
22nd May, 2013, 10:22 PM
Pass in PM

Thank you, sir!! But still same codes:

53-43 internal failure of the SRS unit
21-11 short to another wire in the driver's side belt tensioner


I think but not sure the module is gone. I checked all wiring related to this problem, all is OK. What do you think about that???

You sure that your solution is verified just to order new module from dealer??

please let me know

any way, thank you so much!

cesarjaramillo
23rd May, 2013, 11:11 PM
Hi, same problem with this module and also with an 2011 odyssey. i brought the module and solve the problem. i guess that the problem is a capacitor, because i double check files crash and clear and both are ok reading. regards.

badenaleks
23rd May, 2013, 11:18 PM
pass in pm

Air
24th May, 2013, 04:50 AM
Hi, same problem with this module and also with an 2011 odyssey. i brought the module and solve the problem. i guess that the problem is a capacitor, because i double check files crash and clear and both are ok reading. regards.

I thought so. Thanks

Adamon777
24th May, 2013, 05:23 AM
Clean 200063