audi a4 1.8t AJV 29f800 + eeprom 95040

[delltrotter]

Hi,i need flash and eeprom 1.8t 2002 year ECU 8E0 909 518A Bosch 0 261 206 870
but i need from manual gearbox
flash is 29f800bb
eeprom 95040
it is urgent

thanks

[veloseeped]

Hi,i need flash and eeprom 1.8t 2002 year ECU 8E0 909 518A Bosch 0 261 206 870
but i need from manual gearbox


It's impossible, because software 8e0909518A supports multitronic transmissions ONLY!
If you want to work with MT you must change ECU software to 8e0909518B and recode it, than recode ECU, ABS and dashboard and add clutch switch wiring to electrical sheme

[delltrotter]

you are right
with A is multitronic
it was multitronic,broken,and i put manual transmission,but ABS dont work
i recode abs and dash and i add clutch switch
i cant find software for manual transmission
do you have with B?
thanks

[veloseeped]

i cant find software for manual transmission


NP. Take it...

[delltrotter]

thanks veloseeped write 29f800 car start ok
soft code 0011581
not recode manual gearbox 0011501
do you have eeprom 95040

[delltrotter]

thanks friend,i solved it,i recode manually eeprom
ESP and ABS works normally,just my speed dont show
now i try to solve that

[veloseeped]

thanks veloseeped write 29f800 car start ok
soft code 0011581
not recode manual gearbox 0011501


No wonder - 518B is Euro2 ECU and you must set soft coding to 27501 not to 11501
ECU will not accept 11xxx coding.
If you need Euro4 and activate MIL lamp write 518 (no suffix) or 518M dump inside.

Do you adapted dash for work without multironic?
Speed signal go now from ABS unit through CAN-bus.

[delltrotter]

i write your 518b,i change manually in eeprom soft code and it accept it
i recode dash on channel 60 without multitronic code 1029,but it doesnt show speed
on car with multitronic speed goes via gearbox,i wire it on VSS and speed work normally
speed signal doesnt work via ABS