PDA

View Full Version : ME3.8.3 adapt bigger throttle from VR6 on 1.8T AGU



cruuz
25th May, 2013, 08:09 PM
Hello like in the title, i try to remove the bottleneck throttle by using the bigger one from VR6. But car cogs around and is not really nice to drive. Can somebody give me a hint what maps or constants to change?
The ECU has the code 06a906018r or 0261204673.

here a the cars dyno three days ago with stock throttle.

200370
Big thanks in advance

kennfeld
25th May, 2013, 08:36 PM
Read the serial eprom
The adaptation must be inside

kennfeld
25th May, 2013, 08:49 PM
look this ;)

http://www.digital-kaos.co.uk/forums/attachments/f175/200035d1369344380-vw-passat-2002-immo-off-help-923289_592365830796821_1438544427_n.jpg

cruuz
25th May, 2013, 09:56 PM
Hi vielen Dank ;)
is it at 0x43 ? Idle torque offset?
200386

kennfeld
25th May, 2013, 10:40 PM
strange file that you have for a immo off 4 bytes change you haven even other ecu numbers with your immo off

cruuz
26th May, 2013, 09:17 AM
yes it is a 24C02 with 2K => 256 bytes and immo off but without immo off it doesn't work too.
here is the original:200416

cruuz
1st June, 2013, 03:18 PM
i did the adaptation by increasing IPDK voltage to max. value of almost 5V. now car runs better but idle speed is about 1350rpm and doesnt come down. Any hints?