i need dump ori airbag autoliv partner 550897200..

[Africa]

I need to know if this dump is good, the unit does not respond to or It tests diagnosis indicator lamp.

file is dump .. peugeot partner airbag autoliv 550897200 - 9638604280 _pour M49 _AZ
eeprom is 93c66.

:hmmmm2:

[Autotecno2006]

Here u go ! Try & report. Regards P.

[Africa]

to turn it on, turn the lamp on and off, and then one continuous intermittent ...
not access diagnosis...

[Zeittt]

Hi

Try and report
pass pm

[morfej]

Dump is just fine, no crash inside.

Either the module it self is defect or you have problem with wiring.

br

[Africa]

upa writing is with selecting 93c66 8 and 16bit testing.
access not = autocom, (tested in emulator table) .. Led on and off and then remains blinking ... still does not fit the diagnostic machine.

The data line used in this ecu is the line "K" (pin 7)???

if the machine diagnosis no access ... Hardware problem possibly???.

[morfej]

"The data line used in this ecu is the line "K" (pin 7)???"

No you are wrong.... airbag in PSA cars before VAN network started to be used is on pin 13.

[ELAB014]

Hi mates,
I?ve got just the same problem. I?m unable to make writings in 8bit, only in 16bit mode. I wrote the clear dump in 16bit mode but the airbag lamp starts blinking and there is no comunication betwen the unit and diagnose machine.
THX

[ELAB014]

Cheers autotecno2006,
I used your file and solve my problem
Good job!!!!!! :cheers::cheers::cheers: