PDA

View Full Version : Passat cc 2012 year ecu swaping


vando
28th May, 2013, 07:02 PM
hi my cars ecu is damaged and i buy other (second) part numbers the same one
what tool is needed to adaptation ecu and immobilayzer(bcm)
need synchronization between ecu and immo(cs,pin ,mac adress ?), for this ecu not supported addaptation in chanel 50
for avdia what software options need or other tools can make it

thanks in advance
ruwi
28th May, 2013, 07:13 PM
Hey mate,

If you have the pin number from the 'new' ECU, you can adapt using vagcom, google Ross tech wiki.

On the other hand, if you do not have a pin, what I usually do is desolder the EEPROM from the original ECU and replace the one in the 'new' one with it. Usually takes me 15 minutes to get a car started in these circumstances even with a hot air gun.

Just my 2p....
veloseeped
28th May, 2013, 07:15 PM
hi my cars ecu is damaged and i buy other (second) part numbers the same one


ECU for swap is brand new or second hand?
veloseeped
28th May, 2013, 07:21 PM
Usually takes me 15 minutes to get a car started in these circumstances even with a hot air gun.

Just my 2p....

Better keep silence than give 2p...:hahaha:
Do you ever seen MED17 or EDC17 ECUs ?
Where you found separate eeprom on it ??
vando
28th May, 2013, 07:43 PM
ecu is second hand,I do not have pin code from ecu,it needs more pin,cs,( and mac adress do not know need) from bcm to ecu
veloseeped
28th May, 2013, 09:07 PM
ecu is second hand

Not possible to adapt using pin/cs/mac etc.
If main CPU on old ECU is intact you can make ECU clone - replace it on new board.
vando
28th May, 2013, 09:13 PM
MY old (first) ecu is damaged from salt water

Who ever tried ABRITES SOFTWARE OPTIONS (AN037 - ECU Adaptation by OBDII) AN037 - ECU Adaptation by OBDII (http://abrites.com/index.php?route=product/product&path=57&product_id=166)
can I make it ?
veloseeped
28th May, 2013, 10:31 PM
MY old (first) ecu is damaged from salt water

Who ever tried ABRITES SOFTWARE OPTIONS (AN037 - ECU Adaptation by OBDII) AN037 - ECU Adaptation by OBDII (http://abrites.com/index.php?route=product/product&path=57&product_id=166)
can I make it ?

If you still not invested 10000+ euros in avdi-abrites, best way is ... to buy NEW ecu. :smile:
Because there is a formulae: (second hand ECU + hire service to adapt it) appoximately equal (new ECU + dealer service)
Checked many times....