PDA

View Full Version : 2002 AUDI A4 1.8T GALLETTO MINI READ ERROR



motorsportsz
28th May, 2013, 11:26 PM
Hi there
i manage to identify the ecu with an error but still picks up the hw and sw numbers. when i press read i get an error, is it because i need to pull out a certain fuse or fuses?
if so which ones? and where from ? cheers

The car has had an engine replacement with a different engine code, however i can run a diagnostics fine on it with vcds via obd.

Cheers

motorsportsz
29th May, 2013, 03:23 AM
Bump
Come on people, I know you guys can help me here

Cheers

bobolin4o
29th May, 2013, 10:09 AM
Try without fuse 11.
There is a message in the software!
Regards!

Babos
29th May, 2013, 10:13 AM
my friend made same car and read via obd use MPPS all good!
after he take FGTECH2 clone china and car get error in eeprom and write in DTC tuning protection visit garage AUDI
Best regards.
Babos.

Shaheenem
29th May, 2013, 10:21 AM
I also had issues with Fgtech china and Fgtech mini euro on me7.5 ecu's.

bondiblu
29th May, 2013, 11:24 AM
A lot of tools don't like ME7.5, even some original tools, like Genuine Magpro2 for example I have problems with these, Kess V2 clone failed, China G2 failed, From my experience, I use MPPS many times and works great

wiski
29th May, 2013, 02:48 PM
Yep funny ecu's. Some are done perfectly with mpps and some do only respond to old 1260.

motorsportsz
29th May, 2013, 06:19 PM
Thanks everyone. I will try again with mpps v12 this time. Where is fuse11 located on these? Cheers

bobolin4o
29th May, 2013, 08:48 PM
Thanks everyone. I will try again with mpps v12 this time. Where is fuse11 located on these? Cheers

Here is it...
BTW, the image is mirrored.
Cheers!

motorsportsz
29th May, 2013, 09:09 PM
Here is it...
BTW, the image is mirrored.
Cheers!

Cheers but nothing was attached lol

veloseeped
29th May, 2013, 09:40 PM
Cheers but nothing was attached lol

No need to pull some fuses to write this ECU.
Must go without any dances around fuse panel.

motorsportsz
29th May, 2013, 11:10 PM
No need to pull some fuses to write this ECU.
Must go without any dances around fuse panel.

i don't understand because it is being a weird one. i managed to do a 2000 golf gti 1.8t with the same ecu im sure it was

kevfield
29th May, 2013, 11:27 PM
Just take it off and do it on bench with k-line it will work no probs (euro mini) i had the same but take 15 mins to remove ecu but hay no big deal....

Thanks kev

motorsportsz
29th May, 2013, 11:31 PM
PM sent. I have never done k line on these ecu's. Can you send me instructions on how to?

Cheers

kevfield
29th May, 2013, 11:36 PM
PM sent

Thanks kev

OVERSPEED
30th May, 2013, 12:21 AM
I?m my "crazy" world sometimes it helped even MPPS... didn?t work, and ... like a charm fuse off... read and write OK...
but don?t know Why, same ECU type worked without removing fuse in other car... i?m guessing it?s related to some configuration in dash

bobolin4o
30th May, 2013, 06:44 AM
Cheers but nothing was attached lol
Are you blind? This is image of the fuse box in left of the dash.
How you want to do chiptuning, but dont know where the f****n fuse is in this old vehicle?
Cheers!
P.S If this is some english humor, excuse me, i'm bulgarian and don't understand it... :eviltongue:

atomiczen
30th May, 2013, 11:37 PM
try to stabilize the voltage with a battery charger, some 1.8T love 13v and don't like 12v
i'll found sometimes this issue with ori kess v1 and v2