peugeot partner bsi

[javilette]

hi i need to change one bsi in peugeot parthner i because it have a problem , i have the original dump but i dont have the same bsi , the original is 9657999680 S118085320 F E01-00HG and pin HHJ7 and i have other one whith 9653667580 S118085320E i have original dump too but the original dont works whith this bsi becuse is diferent sw . i tried many times put virgin dump but dont works any ,i tryed to change pin in bsi only but when i change somethings the bsi dont works , i tryed to eraser whith ff and 11 in pin side but dont works . can somebody change pin or virgin dump for this bsi i put the orinal files of original and used one

thank you in advance

PM when i say dont works , the bsi dont have diag whith lexia

[dijo]

hi i need to change one bsi in peugeot parthner i because it have a problem , i have the original dump but i dont have the same bsi , the original is 9657999680 S118085320 F E01-00HG and pin HHJ7 and i have other one whith 9653667580 S118085320E i have original dump too but the original dont works whith this bsi becuse is diferent sw . i tried many times put virgin dump but dont works any ,i tryed to change pin in bsi only but when i change somethings the bsi dont works , i tryed to eraser whith ff and 11 in pin side but dont works . can somebody change pin or virgin dump for this bsi i put the orinal files of original and used one

thank you in advance

PM when i say dont works , the bsi dont have diag whith lexia



I think it is not the same HW
"S118085320E" is for Xara Picasso...?

[javilette]

This bsi is of partner and with his dump works fine but dont stars The engine The problem is work i put virgin

[gyapi11]

Hi. Try it

[javilette]

no works the problem is the same

[javilette]

nothing to khow somw sw that can i change the pin whith correct check sum???? i dont have this problem anytime and i cant get a used bsi with the same numbers

[Shmortz]

just put virgin dump and reprogram BSI with your vin and pin using PP2000, that's all

[javilette]

just put virgin dump and reprogram BSI with your vin and pin using PP2000, that's all


and where is the virgind dump?????:nevreness:



if i dont have virging dump for works whith this bsi , if i cant loock file for this bsi i put immo off and all ok but i prefer put virgin reprogram

[mrchip]

Hi I have same problem with peu Partner, ori BSI are faulty, can I just swap eprom from ori to donor ? or is it not enouht ?

can someone give me some names of programs that can UCH/BSI make Virgin ? which soft I need to virginize it ?
thanks

[danyguit2000]

Hi I have same problem with peu Partner, ori BSI are faulty, can I just swap eprom from ori to donor ? or is it not enouht ?

can someone give me some names of programs that can UCH/BSI make Virgin ? which soft I need to virginize it ?
thanks

Create your own thread and post your dump file.

[Shmortz]

if you put old dump in new BSI it will reset itself, then with known PIN you can reprogram BSI again, I did it many times, no matter BSI number, just need to be same type BSI, it fits from 206 to partner or berlingo or reverse without problem...

[kiszka]

................

[mrchip]

if you put old dump in new BSI it will reset itself, then with known PIN you can reprogram BSI again, I did it many times, no matter BSI number, just need to be same type BSI, it fits from 206 to partner or berlingo or reverse without problem...
Shmortz Mate thanks for helpfull info, so ,, dont need to virginize, just swap eprom and reprogram,, What soft can extract the Pin from old bsi?

[Shmortz]

Shmortz Mate thanks for helpfull info, so ,, dont need to virginize, just swap eprom and reprogram,, What soft can extract the Pin from old bsi?
Good old immo killer can do it, also NYO4 and many others as I know...