PDA

View Full Version : Edc16c34 psa clone



elcarpuz
30th May, 2013, 08:08 AM
Hi, i need to clone ecu, i have another ecu with exactly same HW and SW

i test to read original damage ecu with bdm but impossible

do you thibk if just swap 95160, the new ecu can work?

ominimicu
30th May, 2013, 09:40 AM
yes of course. swap that immo eeprom

elcarpuz
30th May, 2013, 10:37 AM
You think i need code injector?

ominimicu
30th May, 2013, 11:42 AM
no, but if so swap flash.. bu i dont think you ll get the error if so. but i dont think,and coding injectors is easy.

elcarpuz
30th May, 2013, 11:48 AM
I hav?nt swap flash because unreadable with BDM magpro, original ecu damaged

have you got edc16c34 BDM connection? Because i found just edc16

elcarpuz
30th May, 2013, 12:26 PM
I test ecu, car don't start, CAM sensor no alimentation, i need 5v and i have nothing, any idea?

bondiblu
30th May, 2013, 12:38 PM
I hav?nt swap flash because unreadable with BDM magpro, original ecu damaged

have you got edc16c34 BDM connection? Because i found just edc16 BDM connection is the same as other bosch EDC16's http://checksum.cz/forum/files/bdm_108.jpg I believe this is correct

elcarpuz
30th May, 2013, 12:57 PM
Problem solved, no power on cam sensor because clim sensor dead

bondiblu
30th May, 2013, 01:18 PM
Good to hear!