autoperfecto9
30th May, 2013, 02:31 PM
]Good day mates, greetings to all forum members.
The story begins like this:
will dismount the body of the car, to schedule you a duplicate key, and since we did not have the pincode
proceeded to read the microcontroller mc68hc05b32 (1K20C) but we did not read, so after several attempts,
I noticed that the welds base for adapters upa pro are not quite right, resoldered and achieve
finally have read, the problem is that many attempts, apparently I delete some of the information from the microcontroller
so now the vehicle is immobilized, since the information of the microcontroller is practically erased.
So I see three possible solutions to this case
1._ that any partner has a clone of flash microcontroller body ecu and then to schedule
two keys and fix this problem so
Two. - Virginize the ecu flash file and charge some useful information to the microcontroller of the bcm and schedule you some keys and so the
give the ecu sincronize contact with doby and thus solve the problem
Three. - Make inmo off final this ecu, I have understood that a file should load inmo and cut off a line of communication between
the engine ECU and body to no longer communicate more by that line.
I ask for your support if any of you could support me with either a clone files, or files inmo body off to the best way solucioinar that problem where I'm stuck.
I thank you in advance for your help.
Annex the photos, as well as readings of both the flash and the microcontroller
http://i398.photobucket.com/albums/pp65/carsound_cuautla/ECU2_zpse74e4ffc.jpg (http://s398.photobucket.com/user/carsound_cuautla/media/ECU2_zpse74e4ffc.jpg.html)
http://i398.photobucket.com/albums/pp65/carsound_cuautla/ECU_zps78aa7401.jpg (http://s398.photobucket.com/user/carsound_cuautla/media/ECU_zps78aa7401.jpg.html)
http://i398.photobucket.com/albums/pp65/carsound_cuautla/BODY_zpsa5161542.jpg (http://s398.photobucket.com/user/carsound_cuautla/media/BODY_zpsa5161542.jpg.html)
The story begins like this:
will dismount the body of the car, to schedule you a duplicate key, and since we did not have the pincode
proceeded to read the microcontroller mc68hc05b32 (1K20C) but we did not read, so after several attempts,
I noticed that the welds base for adapters upa pro are not quite right, resoldered and achieve
finally have read, the problem is that many attempts, apparently I delete some of the information from the microcontroller
so now the vehicle is immobilized, since the information of the microcontroller is practically erased.
So I see three possible solutions to this case
1._ that any partner has a clone of flash microcontroller body ecu and then to schedule
two keys and fix this problem so
Two. - Virginize the ecu flash file and charge some useful information to the microcontroller of the bcm and schedule you some keys and so the
give the ecu sincronize contact with doby and thus solve the problem
Three. - Make inmo off final this ecu, I have understood that a file should load inmo and cut off a line of communication between
the engine ECU and body to no longer communicate more by that line.
I ask for your support if any of you could support me with either a clone files, or files inmo body off to the best way solucioinar that problem where I'm stuck.
I thank you in advance for your help.
Annex the photos, as well as readings of both the flash and the microcontroller
http://i398.photobucket.com/albums/pp65/carsound_cuautla/ECU2_zpse74e4ffc.jpg (http://s398.photobucket.com/user/carsound_cuautla/media/ECU2_zpse74e4ffc.jpg.html)
http://i398.photobucket.com/albums/pp65/carsound_cuautla/ECU_zps78aa7401.jpg (http://s398.photobucket.com/user/carsound_cuautla/media/ECU_zps78aa7401.jpg.html)
http://i398.photobucket.com/albums/pp65/carsound_cuautla/BODY_zpsa5161542.jpg (http://s398.photobucket.com/user/carsound_cuautla/media/BODY_zpsa5161542.jpg.html)