PDA

View Full Version : PROBLEM WHIT AUDI A4 ECU MED17.1



PIRATAPEREZ
4th June, 2013, 11:57 PM
Hi all, I have a problem and I need a little help.
A friend owner of A4 TFS attempted to make chip from APR they use (UPD) programing sistem and we realy dont know way but the ECU, stay like as seen in the photos.

202322202323202324

Carefully solved the problem of short circuit we can read all program with TRASDATA.
We bought a new ECU, and first top ut in the car, I read it as coming (virgin) and program the file (.dim) Reading with a trasdata from the old ECU and the car will not start ...
I replaced the virgin program and took the car to AUDI and diagnosis NOT RECOGNIZE the ECU ...
I returned to program the file (.dim) from the old ECU and if diagnosed and leaves programing in AUDI but when finished all steps and car will dont start ...
I do not know that I can do ..?
Thanks for all and sorry my bad English

ominimicu
5th June, 2013, 01:24 AM
why didnt you just swaped immo eeprom only from the beggining?

veloseeped
5th June, 2013, 03:10 AM
why didnt you just swaped immo eeprom only from the beggining?

This means swap main TC1796 MCU in 416-pin BGA package ;-)
There isn't separate eeprom on board.
Cloning VAG MED17/EDC17 ECU based on TC17xx MCUs is not possible with simple methodes.

Maartinj
5th June, 2013, 08:15 AM
Why not to do a ECU adaptation via AVDI ?

PIRATAPEREZ
5th June, 2013, 12:56 PM
veloseeped (http://www.digital-kaos.co.uk/forums/members/174099-veloseeped/) :

Is not possible with simple methodes, with what methods if possible??

ecutuners
5th June, 2013, 01:25 PM
Ecu can be cloned using optican or x17 / T-boot, or immo off will work fine

PIRATAPEREZ
5th June, 2013, 03:52 PM
ecutuners (http://www.digital-kaos.co.uk/forums/members/247314-ecutuners/):

Thanks for the tip.
If OFF File INMO it works well, I can record with TRASDATA of DIMSPORT?
OFF INMO File as I can get?
Can be, for perform reprograming,ECU now inoperable forever..?

ruffles1986
5th June, 2013, 04:03 PM
This means swap main TC1796 MCU in 416-pin BGA package ;-)
There isn't separate eeprom on board.
Cloning VAG MED17/EDC17 ECU based on TC17xx MCUs is not possible with simple methodes.

Not is possible Clone Ecus with Tricore Based reading eprom and flash? reading flash and eprom with fgtech for example...
What is the procedure and tool for do it?

I am very interest on this

autokeypro
8th January, 2020, 07:48 AM
Same problem, what's the solution?