OPEL CORSA C 2007 FLASH EDIT

[makura]

Can some edit this flash and remove the installation of Body control module (BCM) and (electornic instrument cluster EIC).
The original ecu is an Delphi Delco 1.7L/TX2 Diesel ecm with numbers 8972272258 09389429,this ecu is dead cant read any thing from it and now i have a replacement slightly different.
After reseting it and adapting it to the immo the immo light keeps flashing and when i check TDC i get wrong ID from from BCM and other one says wrong id from instrument cluster,now this car does not have BCM nor an electonic cluster.
replacement unit is
8972406221 28130433
delphi delco 1.7L/tx2 diesel ecm

[makura]

How about the original flash from ecm 8972272258 09389429 instead?

[Shmortz]

when replacing ECU on corsa you need also to reset BCM and EIC and to reprogram it again using old pin, then everything should be OK...

[makura]

when replacing ECU on corsa you need also to reset BCM and EIC and to reprogram it again using old pin, then everything should be OK...
Well this car does not have BCM nor EIC,windows are all manually rolled up or down not electric.

[makura]

Is this setting in the eeprom or flash?

[ruwi]

Do this, go through your variant coding, add what the vehicle has and remove what it hasn't... Do you have access to your ECU, ie. with pin...? If not, use CarProg to work on the ECU to extract pin or force an ECU reset... Either way, let us know :)