copy key fiat grande punto year 2006

[eiemax]

I friend, i want create a new key for fiat grande punto year 2006, 1.2 petrol.
I want know where is the correct way for this copy.
This car have body computer delphi (black color), the dump is attached
The original key, have transponder pcf7936, id 46

I want one key, without remote

Is possible this copy with zed-bull clone?

[rayjay]

what you can do is precode this with the zedclone using your dump and using the Pin Code - 23557 add this to the car with obd with sbb t300 etc

[eiemax]

Hi friend, very thanks. You can explain the procedure to do with zed-bull?

Thanks

[rayjay]

yes with the pc connection load the dump that you listed earlier and the zedbull program will recognise it after you have clicked "open file dump" you can then calculate pincode and it will show the pincode that i gave you above Pin Code - 23557, now click on the transponder programme button and put the chip into the zed and it will precode it with the info from the dump, this will be ready to be added into the car via obd.

[eiemax]

Yes, but zed-bull clone, not have this body in the list of module. This car is grande punto, the body computer, is different from that of the old punto

[paul_12345]

cheapest option buy effi software... before you ask have a quick look through the forum you will find it.

[nicocr]

idem, effi work greats

[eiemax]

Ok, thanks, where is the cost of the new versione of this software?

Thanks

[nicocr]

http://www.digital-kaos.co.uk/forums/f177/zed-bull-clone-second-life-274682/ , mp to sierra. don?t buy craked version, the original have more modules and is updated

[messhi78]

yess effi do this job weeeeel 100/100

[eiemax]

Ok friend... if i want add one remote key fob? I can? The car have not keyfob

[rayjay]

if the car has remote unit in the car from manufacturer then yes just programme it in, lots of these older fiats used aftermarket remote units but you normally see these wedged in by obd where they have been wired in

[eiemax]

The body computer of this car, is compatible with remote control, but the car have only two keys, without remote, i want add one.
Where is the correct procedure?

Thanks

[rayjay]

its a 7946 chip for the remote keys the whole key inc remote added at same time after precoding as one unit not chip first then sync etc

[eiemax]

Hello friend, and thank you for your answer. I try to summarize the procedure to see if I understood:


1) I take a remote control used, and replace the pcf7946at
2) I make the precode of this, with the file read by the body and zed-bull with EFFI software
3) I program the key on the machine, with the diagnostic tool
4) When i have finished programming the key with the diagnostic tool, the remote control works, without doing anything else.


all this is ok friend?


thanks

[rayjay]

yes unless anyone else says otherwise effi has pcf7946 and 7947 this is the info effi gives for your dump

93c86(28000766), 8pin, 2048 Bytes
Fiat: Grande Punto, Fiorino, Bipper Tepe, Nemo, Mito
ID: 46
Transponder Type: PCF7936 or PCF7946/47 Remote key
Transponder should be introduced to car using diagnostic device

[Diodakus]

HI
Please read PIN CODE - BSI Fiat Fiorino 2009
EEPROM 28000766 / 93C86

275896


THX :giveup:

[amper]

Pin Code - 93552

[simaservis1108]

With EFfi remote key doesn't work,tested today.
EFfi can only do non remote key.

[gokey]

tmpro can do it