HELP:FAILED TO PROGRAM PCF7946 ON CLIO2 ALL KEYS LOST

[yssf]

Hello guys,
I can't program 7946 on clio2,all keys are lost.
get access for programming,pin correct.
precoded the transponder with AD900 successfully.(used id46)
my question is:do this car need only original dealer key to be programmed?

thanks

[nazz2]

You need a id 46 integerated remote key, you cant programm A transponder on its own!

[DottoreBL]

Yes, u need remote key

[gokey]

or precoded transponder to dump

[westville locksmiths]

No you donot need a remote key .You have to precode pcf 7936 on Ad 900 With pincode

[yssf]

No you donot need a remote key .You have to precode pcf 7936 on Ad 900 With pincode

thanks westville,i have AD900 i never do it before please can you give me the procedure
i know is in hitag2 option i have also pcf7936 chip,what next?

[keygargoil]

actually only the sport modells and pre 2003 sagem immo boxs will let you do a 7936 by obd otherwise you can make it with tango by dump or a pcf7946 remote key goes straight in them

[keysph]

Also carry in your mind that the PCF7936 must be Manchester mode not Password when programing via OBD in Renault.

[ninja123]

did you attach yourt pcf7946 chip to a good remote pcb?

done loads of these without problem.

ninja

[yssf]

just to update,i start the car with pcf7936 by eeprom key making with chinese clone hitag V3 it add the key to dump and start the car right away(pcb removed)

[karmann]

pcf7936+cripto+psw