Renault ECU decoder and SIRIUS 32

[bangreno]

Hi,
I got my Universal Renault Ecu decoder and some few immo emulator for Renault.Right,
My first ECU is from Renault Kangoo , SIRIUS 32 without CAN.
Wiring Ecu decoder to ecu is clear , but I need someone to make me clear about this :
-I have to select operation mode , witch mode is ok for Sirius ( standard, advanced1, advanced2) ?
-how to check if ecu is now virgin on table , because in most case, car is far away.
Thanks,

Envoy? depuis mon GT-P5100 avec Tapatalk

[ninja123]

You cant check if sirius32 is virgin on the bench, and this tool not work for all sirius32, I have tried many times and only worked once, best to remove and read flash and post for immo off or virgin+emu is best.

Tool works well for fenix 3 and 5, safir etc.

If you buy from poland, the emulator not working, chinese emulator works good, put picture of your emulator and ill tell you if they good or not.

ninja

[autochei]

for sirius 32 u must buy fiat renoult tool from www.diagnoza.ro (http://www.diagnoza.ro) 10 minutes procedure and ems 3132

[ninja123]

i dont see such a tool in this site??????

ninija

[bangreno]

Fiat / Renault Tool (http://www.obdtool.nl/index.php?route=product/product&product_id=71)

look like it's the same there

[bangreno]

You cant check if sirius32 is virgin on the bench, and this tool not work for all sirius32, I have tried many times and only worked once, best to remove and read flash and post for immo off or virgin+emu is best.

Tool works well for fenix 3 and 5, safir etc.

If you buy from poland, the emulator not working, chinese emulator works good, put picture of your emulator and ill tell you if they good or not.

ninja

Mine is this
Bougth from www.autokmfactory.com

Envoy? depuis mon LG-E615 avec Tapatalk

[ninja123]

this is good ones :)

ninja

[bangreno]

Ok. Will try to select each of operation mode 1,2,3.
Thks


BANGRENO

[ninja123]

read flash in sirius 32 and I can make virgin for you, then fit emulator and all is good to go.

ninja

[bangreno]

read flash in sirius 32 and I can make virgin for you, then fit emulator and all is good to go.

ninja

This is the right solution people advice me.
My problem is that I cannot read /write 29F200 with my willem, maybe problem in dip setting,
Ordered high quality psop44 adapter but still not reading.
Now looking to buy a obd tool to read flash by k-line


Envoy? depuis mon GT-P5100 avec Tapatalk

[mexanico1971]

your willem is the PCB one ?!
check the jumpers and see if you get a good ID !

BR

[ninja123]

willem is working good for this flash, i get problems writing to the AB ones but all BB are good.

ninja

[bangreno]

PCB50 is my board , dual power model.
I have also adapter to solder bought from SIVAVA

[coolsoda]

204866

I have this diagram for sirius32,is it telling me to fit a relay while its on the bench

[bangreno]

Yes, you must fit a relay , when ignition on , relay must close and you get 12V at ecu pin 66

[maybach_]

Someone known wich mode to use for renault ecu decoder on sirius 32??
Can'nt read this flasch!

Tanks for help!

[shadow12]

Hi, all details are on here, codecarhttp://www.codecard.lt/images/file/Universal%20RENAULT%20injection%20ECU%20decoding%2 0tool%202006%2004.pdf

[bangreno]

Hi, if You are planning to work frequently on those ecu I recommend to buy TL866 Minipro programmer.
With tsop44 adapter , this tool is very stable for reading F200 flash fitted on Sirius32

[autocargo]

Your Willem is looking just like mine... I can tell you is working good with flash 29F200. I made my own adapter and read/write good. I also have TL-866 programmer and that one is working good too.

[PierreTheron]

Hi
How long will adaptor last m8 .

Maybe 30 uses ..

Then beter to buy wellon or other good programmer with adapter . At least wellon tells you which pins does not have good connections ..

[autocargo]

Hi
How long will adaptor last m8 .

Maybe 30 uses ..

Then beter to buy wellon or other good programmer with adapter . At least wellon tells you which pins does not have good connections ..


I've got two of them :) (self made adapters) Used them a couple of time, still OK. Later on I bought TL-866 programmer with with tsop44 adapter. My old trusty Willem stays in my drawer for now... it's good to have backup tools :)

[dadal]

has anyone read sirius32 in bootmode ? I know this thread is about renault decoder but I just wanted to know if someone could do it, I can 32N read in boot but 32 never succes,
I think 32 and 32N has different wiring up,, do have someone a trick for sirius32 ???

[mexanico1971]

in boot mode only 29f200BB

[PierreTheron]

Hi
Wanted to say this long time back .

with decoder there is specific way how to make ignition on and off for it to work on sirius 32. Then remove the ecu and decoder will work 100%


But i never use this function ./


I have an immo off file for each off these ecu's that always works 100%