iveco daily key logic location

[nazz2]

Hi guys
Im looking to see where key data on module 36 tmpro Tmpro2 - Software modules description (http://tmpro2.com/index.php/modulesdescription1) is located ,this is id 46, same as Euro cargo, as you know only tango can write the key data to the eeprom 93c56 or 93s56 directly.

Alternatively, is it possible to do the immo on bench, by connecting 12v and programm the transponder via a key programmer? has any one got the digramme?any help is greatly apreciated.

ps. this is an example of 2004 eurocargo which i did with same immo type

nazz2

[scanvec]

Hi read the old key data and send it.

[nazz2]

hi, This is read by hitag, is this the format that you need?also can you explane where IT is writen in the dump? Thanx inadvance

Sorry this is a lost key situation.

[nazz2]

bump.... common guys i need your help!

[rayjay]

cant you write via obd with the pincode instead?

[sierra]

There are samples of dumps?
Are necessary original and after key addition.

[nazz2]

well, the dump is from euro cargo, and I don't have 24 V tester/programmer, I was thinking if an obd plug and loom+ignition aerial, connected to the immo ,we just have to find the 12V, and k line, and ground, hence no need to use a key programmer, am I missing something else? sierra mate, unfortunately this was done for me by a friend today with tango, who sent me 2x 46 id transponders, unfortunately he didn't keep the key data, but I have the 2x key file data which tango created for me, if you are interested I can send that one to you. I wrote back the 2 key file to the eeprom, and the lorry started, let me know, Thanks all.

[sierra]

well, the dump is from euro cargo, and I don't have 24 V tester/programmer, I was thinking if an obd plug and loom+ignition aerial, connected to the immo ,we just have to find the 12V, and k line, and ground, hence no need to use a key programmer, am I missing something else? sierra mate, unfortunately this was done for me by a friend today with tango, who sent me 2x 46 id transponders, unfortunately he didn't keep the key data, but I have the 2x key file data which tango created for me, if you are interested I can send that one to you. I wrote back the 2 key file to the eeprom, and the lorry started, let me know, Thanks all.

Yes, of course, send me please a dump.
Thanks

[nazz2]

you are the man, I will send you the dumps on Monday mate.Thanks

[keygargoil]

Tango writes the keys directly to the dump but it is encrypted and there is a checksum on there as well that's why other programmers can only generate a precoded chip and calculate the pin code to programme by Diag all tangos makers are ready to start

[nazz2]

Good info m8 Thanks, heres the original dump and the key file for one key for sierra. lets see if he can break the spell!!