PDA

View Full Version : BSI PEUGEOT 206 CORRUPTED?



davidup
14th June, 2013, 07:19 PM
Hello friends,

I have a Peugeot 206cc bsi that I think that the info is corrupt. Can you test the file? I can't extract pincode and car doesn't starts.

this car had a problem with electric roof, someone tried to repair thinking that it's a bsi problem and now doesn't starts.

Is my first time that I see this problem, can you help me?

BSI: 9646777680

204044

thanks

ttzag
14th June, 2013, 07:50 PM
i think your dump no good , there is no pincode on it
put ffff in all dump and precode it with PP2000 ,
post here the dump from ecu, some one help you with the pin

davidup
17th June, 2013, 01:04 PM
thank you I will search on ecu pincode but I don't know where i can find it

cubica1
17th June, 2013, 02:17 PM
you can find PIN into ECU..possible 95160, too.

cubica

djamelEZS
17th June, 2013, 03:07 PM
bsi eeprom files are not all fffffffffff use virgin one or change pin code to another file sure not corrupted one get pin code from carde code or ecu it's easy for this model

davidup
18th June, 2013, 11:25 AM
Hi, but in this ecu not have eeprom. It has am29f400bc from IAW 48P2.3T. I know that is possible to make immo_off to this ecu but I'm interesting in repair bsi.
If I put all eeprom in FFFF it will be virgin?
I'm searching not corrupted dump for this bsi...

Zmann
18th June, 2013, 03:15 PM
PIN is in 29F400.

you get someting like in the image for VIN when connect PPS? possibily your corrupted dump is ready for code by PPS, try it.

davidup
18th June, 2013, 04:38 PM
thanks Zmann but I don't have the car here. The car shows problem with immo. I think that the cars owner put contact on when bsi was out from car.
I think if I can put the PIN in the eeprom then it's possible to start the car, nobody try this?

ttzag
18th June, 2013, 05:07 PM
even if you put the pin in the bsi dump you cant start the car

igorr
18th June, 2013, 07:14 PM
PIN is in 29F400.

you get someting like in the image for VIN when connect PPS? possibily your corrupted dump is ready for code by PPS, try it.

is this pps read from bsi vhen bsi is virgine

Zmann
19th June, 2013, 01:38 AM
never touched the real virgin bsi from factory so don't know. but when battery went flat pps always reads like that and found that we may be able go on with pps recoding as if it was virginised.

second to ttzag, but it would be possible if doing the same way but to the ecu.

djamelEZS
19th June, 2013, 09:12 AM
please send 29f400 dump i will send you your pin code and virgin bsi ok

davidup
21st June, 2013, 12:53 PM
205296

Hi friends, Just I have the car. I upload original file from ecu and immo_off for your check. Now I know that bsi is not from car, i think that if I need to virginize the original bsi, am I ok?

thanks!