dm800 support

[westkill]

the second stage 72 bootloader for dm800
================================


Use this command in Telnet:
=====================

ipkg list | grep second

this tells you what bootloader is installed

how to install
==========

ftp the dreambox-secondstage_72-r1_dm800.ipk
to the tmp folder on the dm800
then go go your addons manager and manual install .ipk
then do a hard restart

New Drivers DM800 10/03/2009
=======================

vers (20080605 -> 20090310)

add support for auto pilot tone (dvb-s2)
add possibility to set oled contrast and brightness
add mp3 hardware decode support
add support for dream keyboard
add 2nd policy for video content > 16:9
add support for h264 cinemascope video content
add some changes for the autoresolution plugin
add possibility to select hdmi colorspace via /proc/stb/video/hdmi_colorspace
add support for pilot tone for all lpdc modes not only for 8psk
add possibility to set fallback framerate ... for better mediaplaying support
fix left/stereo/right settings for hdmi output
fix tone_amplitude setting for alps-bsbe2 frontend again
fix wss signal on parallel cvbs out
fix some scaling problems
fix remote control layer 3 and 4
fix some demux problems
fixed some ac3 problems
fixed some DVI problems
fixed some smartcard reader problems
improved stability
improved remote control sensibility
improved picture quality with interlaced output modes
dvb-c / dvb-t frontend driver optimizations
higher demux bandwith to support more HD recordings at the same time
faster channel change with dvb-c frontend
lower mem consumption by drivers .. so we have now 160MB for linux

how to install
==========
ftp the dreambox-dvb-modules 2.6.12-5.1 drcmstb-dm800-20090310-ro dm800.ipk
to the tmp
then go to your addons manager manual install
then do a hard restart

[dimem]

do you know is there are any problems to install this drivers on dm800 clon?

[dimemeff]

I need download this files.
Thank you

[keydember]

hi,

my dm800 is broken and when i try to use dreamup, i get the CA error message.

When i startup the dreambox and load the dreamup and during loading the dreamup, i click on exit.

Then im able to telnet to the dm800. When i try to install the secondstage 72, i get the message that the second stage is allready updated with secondstage 75.

Is there a way to remove first the existed secondstage and then install a older secondstage file?

any help appreciated

keydember

[braindead]

hi,

my dm800 is broken and when i try to use dreamup, i get the CA error message.

When i startup the dreambox and load the dreamup and during loading the dreamup, i click on exit.

Then im able to telnet to the dm800. When i try to install the secondstage 72, i get the message that the second stage is allready updated with secondstage 75.

Is there a way to remove first the existed secondstage and then install a older secondstage file?

any help appreciated

keydember

Why dont you install a BL 75 image then you wont have to downgrade the BL75 to 72

[keydember]

what and where is the bl75 image? is it a ipk or nfi image?

thanks allready for the reply and help

keydember

[jumpinjo]

NABILOSAT 0.12 BL75 SIM2.01.nfi