Nissan NEW NAVARA 2012 D40 2.5TDCi - MATS System Malfunction

[indonesiamotor]

Anyone Can Help Me????
I got trouble with my Navara 2012 - DTC P1610 "NAT System Malfunction" there is immobilizer blocked, need to register immobilizer
i dont have nissan consult III, any idea what tools should i do??
thx

they ask 4 digit serial number : XXXX

205354 ----------------------------------------- 205355205356This ECM NAVARA 2012
BCM NAVARA 2012

Maybe anyone can make immo off??
or register immo??

THX

[qwertyuiop12]

try pin:5070

[keysph]

P1610 NATS lock mode (unregistered key has been used)

Fault code for "Lock out mode" (when an incorrect key has been used) can be removed with a coded key by turning the ignition on for one minute or, when no coded keys are available, by coding keys.
also:
If the immobiliser has been locked (incorrect PIN entry), disconnect battery and re-connect, then turn ignition on/off three times.


Try with T300 and pin 5070 to program keys. This car accepts only remote keys as far as I know.

[achaccha]

Please can you post inside the circuit board? you may need to do a reading of a microprocessor.
regards

[indonesiamotor]

Please can you post inside the circuit board? you may need to do a reading of a microprocessor.
regards


circuit board which should be in the post? whether BCM or ECM?

[indonesiamotor]

P1610 NATS lock mode (unregistered key has been used)

Fault code for "Lock out mode" (when an incorrect key has been used) can be removed with a coded key by turning the ignition on for one minute or, when no coded keys are available, by coding keys.
also:
If the immobiliser has been locked (incorrect PIN entry), disconnect battery and re-connect, then turn ignition on/off three times.

Try with T300 and pin 5070 to program keys. This car accepts only remote keys as far as I know.



according to the story, before the engine can not turned on , something happen with headlights suddenly turn on itself when the button in off position.
then "engine check" disappere, and then "engine check" light countinues blinking and "immobilizer key" sign is on .

[achaccha]

BCM please post image. regards

[indonesiamotor]

205548205549
here the circuit board....

[achaccha]

please my freind read 9s12 and post

[indonesiamotor]

then how to remove immo off? i think better immo off with read .bin file MC9S12H256 Visteon ??
can you help me for read the MCU?

[achaccha]

I can know what tools you have to read this MCU?
immo off is not possible in this case. reading will serve to get the pin code and also to program the key.
Upa suggest Programer for this reading.
regards

[indonesiamotor]

i have Upa universal programmer.... i have already ... but how to read it??
I have top universal programmer