PDA

View Full Version : Peugeot bipper 1.4 hdi read problems edc16c34



pulsar2000
25th June, 2013, 07:01 PM
any one have any help for me. 2008 van,
1400hdi, Bosch edc16c34,
Can not id, or read this ecu via OBD,
tried mpps, Fgtech, Officail Kess V2,
Nothing, ecu never wakes, yet vehicle 100% ok runs fine, just customer wants more power,
what next & why no read,
can see clearly bosch edc16c34 under bonnet,
anyone had similar experience ?

Thanks

assitutto
25th June, 2013, 07:12 PM
only bdm for that car

pulsar2000
25th June, 2013, 07:49 PM
ok but k-suite says OBD - ?
can table flash cables to ecu ?
OR just BDM no other option,
Why BDM only on this car whats missing

ominimicu
25th June, 2013, 08:34 PM
that is not normal my friend at least you should have been able to Id abd get a partial or complete read.
make sure the obd connectr of the car is ok. Do diag tools connect? car harnes must have something

quattrotr
25th June, 2013, 08:42 PM
Beeper and Nemo have different seed key's and can't be read over OBD as 207, 308, Expert or similar PSA cars. BDM is the safe solution...

pulsar2000
25th June, 2013, 08:52 PM
ok Quattro, what year was this from ? this is 08-09 Vehicle,
ok next question were can i buy good BDM Bosch adaptor edc16 etc, not chinese pcb & pins please want already made up & ready,
Thanks

ominimicu
25th June, 2013, 09:39 PM
edc16 is straight forward from BDm no need for adapters

assitutto
25th June, 2013, 10:15 PM
i have the same problem, k suite information is wrong, on this car only bdm work

pulsar2000
25th June, 2013, 10:35 PM
edc16 is straight forward from BDm no need for adapters
no need bdm ? how so

Nio
25th June, 2013, 10:38 PM
ok but k-suite says OBD - ?
can table flash cables to ecu ?
OR just BDM no other option,
Why BDM only on this car whats missing


Seeding key not correctly on Kess. Bdm is the solution. Regards.

ominimicu
25th June, 2013, 10:40 PM
no, you dont need adapters, just a bdm function tool

pulsar2000
25th June, 2013, 11:07 PM
bdm 100 ? were to connect then, sorry assumed need probes for the pads

flixuno
29th June, 2013, 09:58 PM
hi!
my experience is with fg galleto by bdm ok.
read eeprom and flash all

quattrotr
30th June, 2013, 02:46 PM
Probes make life easier for BDM jobs. Working bdm tools can these ECU's easily. I personally use EVC BDM100 and probes so don't know wheter these 20 USD chinese probes are ok or not...

imcumen
30th June, 2013, 10:42 PM
I think it should work with fg galleto by OBD if use S.1279 Module for PPS2000
the following vehicles psa that this scan with this module
Peugeout Bipper
Peugeout Boxer III
Peugeout Boxer III minibus
Citroen Nemo
Citroen Jumper III
Citroen Jumper III minibus
you just need to connect the module to fg galleto
that's just my opinion

BR

tarekdj
3rd July, 2013, 01:16 PM
hi, the S.1279 work fine with diagbox 7.04 (scar) or no , thanks