Problem start kango 1.5 dci

[rachmach]

I hav? kango 1.5 dci the immobilizer indicator does not light up, I have Check the fuse And i hav? changed 3 uch
In Diag the ECM is blouqed
I n?es help please

[rachmach]

Help me please

[ominimicu]

can you establish comunication with ECU?

[rachmach]

Yes with Diag i hav? acc?s to ECU but no acc?s to UCH and immobiliser

[ominimicu]

UCH could be faulty. waht ecu is it. maybe we can do an immo off? do all the other UCh functions work ok?

[rachmach]

ECU is ddcr
All fonction work fine but locking And unloking nit work

[Nio]

To make off this ecu need emulator. I have emulator, pm me if need. Regards

[rachmach]

I dont have emulator i want to repair this Problem And i want to the lamp Check up in Dashboard

[Nio]

Buy emulator and solve problem. I have them but for rules respect no post commerce. Regards.

[rachmach]

Yes i know freind CAN you send me the digram wirring for emulator

[m3evo]

Yes i know freind CAN you send me the digram wirring for emulator

The wiring diagram for emulator is already on DK if you search you will see it.

[benguessoum]

hello

maybe you must disconnect black plug in uch and tested if the wire green color if can recover in ecu

[flixuno]

hi!
uch dismount and see if there is dirt
sorry for my English

[m3vuv]

check the engine control relay in the fusebox near the battery,normaly the cream wire rots out.

[skrubal]

Check the shut-off switch or wiring to the ECU. Sometimes around about the battery!

[Meat-Head]

Sounds more like ritten plug no lower to u h. Hence no licking ir lef

[flixuno]

hi!
immobilizer light is controlled by the UC.
check the positive and negative uch
checks the data bus

[elmassioui]

check wiring from dashboard to uch

[flixuno]

HI!
uch has to be the same.
in the diagnosis of uch, you have to look at the synchronization values of uch
motor with ecu and key.
and comprovar the 12v and gnd.

[haci1978]

this car woluld ecsanric sens?r fault