PDA

View Full Version : Crafter 2.5 TDI 2008 EDC16CP34 need DPF OFF


258
29th June, 2013, 03:25 PM
I need help with DPF OFF Crafter 2.5TDI EDC 16CP34 sw 503936,
please no Volta or ecusafe solution.
I tried to switch bytes, car has no fault in the ECU, but runs regeneration and comes black smoke,
Here byte 61536 63536 02000 04000 00000 00000 00000 00000
00000 00000 00000 (00001(0 DPF Off)) 00000 00002 00000 00000 00008 00000

one must still turn postjenction Map?
morgano
29th June, 2013, 09:31 PM
Did you do a forced regen before remove DPF and flash dpf off file???
Diagnosticated
30th June, 2013, 06:46 AM
What address you use? Switch is at 1D4378. Change that to 00000
258
30th June, 2013, 09:59 AM
Did you do a forced regen before remove DPF and flash dpf off file???
Yes, I have made it and remaining ash is set to 0
258
30th June, 2013, 10:13 AM
What address you use? Switch is at 1D4378. Change that to 00000
I use address 1C4296
kennfeld
30th June, 2013, 10:40 AM
what sw coding do it run ?
258
30th June, 2013, 10:44 AM
what sw coding do it run ?
1037503936
.074906032
BPG-81030.07.07--
--H06---18840202
WV1ZZZ2EZ86014984.
074906032AT 5175.
.R5 2,5L EDC 0C00SG
258
30th June, 2013, 03:03 PM
What address you use? Switch is at 1D4378. Change that to 00000
Thank you, that was the correct switch. problem solved
amrif
7th July, 2013, 02:00 PM
Are you sure if this switch is enough to completely turn regenerations off?