1999 mercedes c200

[coder5]

Hello all
I have re programmed the key with with mb keyprog clone reading both hc05 chips in
the ezs and both chips in the esl .The software calculated new key for motorola key
with hc05e6 041.The keys were also calculated by skc from original dump.The problem is
when testing on the bench with esl connected with key inserted led on key keeps flashing.
When i read key with ak400 it reads the key ok but says key is blank.I would be grateful for any help.
Regards
Larry.

[elephantul]

restore original content of ezs, put here dump from outside motorola,serial nr ezs,serial motorola key,is criminal to make key in ak400 way

[coder5]

Hello elephantul.
Thanks for reply I sent you the original outside dump in a previous post
and you calculated keys for me.When I test it on the bench led on the key
is flashing.
Regards
Larry.

[elephantul]

desolder both motorola from ezs ,clean pads , resoder again with more atention, i work 2 days for one ezs with same problems

[coder5]

Thanks I will try that.