View Full Version : Problem security mode after read OBD with magpro2 on Vito

3rd July, 2013, 02:05 PM
Hi, yesterday i read a vito 2009 with original magpro2, save dump all ok...

but after, MIL light and low power, security mode activated!

Anyone know why and how resolve this problem? Is it normal on this model?

thanks all

3rd July, 2013, 02:09 PM
if your tool is original why not write direct to MagicMotorSport to receive support.

here you will get something but not official support!

3rd July, 2013, 02:21 PM
Because i have***324;t renew magicmotorsport assistance

3rd July, 2013, 03:56 PM
it will cost you probably about the same amount of money to fix the problem now.

3rd July, 2013, 05:40 PM
Magpro2 assistance is 800 euros by year, you think i need 800 euros to solve the problem?

3rd July, 2013, 10:33 PM
hi, where is the ecu? bosch type?

you write the ori file , and same problem??

4th July, 2013, 12:13 PM
Is the message security mode activated on the cluster? Or in the fault/event memory?

If its on the cluster you have a CAN fault problem

If the message is being displayed on the COMMAND unit you with need the pin re entered with STAR

If its in the event memory(not fault memory there is a difference), disconnect the battery for 15 mins

What engine is this? Om651

9th July, 2013, 11:52 AM
I test a MOD file with DPF OFF, now, no MIL, no DTC in memory but always no power

what is the solution

9th July, 2013, 01:04 PM
Original asks that bdm ecu and write it by bdm, with bdm no nothing problem.....with obd2 more problems with this vehicles.

9th July, 2013, 02:10 PM
How can i do now?

read by bdm?

9th July, 2013, 02:22 PM
I read on other forum very difficult to open this type ecu without damage it

9th July, 2013, 10:27 PM
i think your dpf file was done with volta or ecu safe thats the problem . this tools delete the most dtcs no good solution upload the original file . i think your problem is in eeprom

10th July, 2013, 12:49 AM
M8, New ecu will be more expensive than subscription, you will expend the money y a new ecu and will still without asissistance.
I think you should pay for subscription and ask for unlock file to magicians.
At the end with the same amount of money you will get more results.


10th July, 2013, 02:11 AM
you can find spare ecu on ebay for cheap if you have a backup of your ori it's not a problem to deal with ecu as many people used to say.
what ecu / engine it is ?

11th July, 2013, 11:20 PM
It's edc16c31. 204hp, any solution?