opel EDC DPF Removal

[parapilot]

hi guys

i have a 1,9 opel vectra ECU that i need to remove the DPF. Its a Bosch 0 281 014 450.

I have attached flash and eeprom. I did run the file through ECU safe software edc16, but the file it produced (that iv attached) gave no crank to the car, and no comms with the ECU so its wrong. It ran ok with original file.

Can anyone remove DPF properly in this file please??

Thank You!!!!

opel_edc_flash.bin - Original Flash file
opel_edc_eeprom_95640.bin - Eeprom if needed
opel_edc_flash_dpfoff_ECUSAFE.bin - File ECU safe gave, does not work :(
207871

[mishu_b]

yes, this can be done. The correct solution is done manual.

[Nio]

Yes, manual solution function good. Regards.

[pepeoi]

Here is the file - PASS PM

[parapilot]

Can anyone remove DPF manually? Still after assistance please :( pepeoi's file above is no good.

What location are the maps on Winols??

thanks
jamie

[morgano]

But you want DPF or EGR?

Because they are different things.

[mishu_b]

you have to be clear in your request:

DPF_Off
EGR_Off

2 very different operations!

regards

[parapilot]

hi,

DPF please!

Thanks
Jamie.

[pepeoi]

why do you say my file is not good? Because its not for free ?? HAHA File is 100%


Then go Peddle it somewhere else mate .. ...............I just love sellers :banghead:

[smirnoff_rules]

are members charging for files now on this free forum ???

[PremierD]

He's not now mate .. :)

[mishu_b]

as I told you - you have to do this manually or ask for support at someone with this know how.


regards

[parapilot]

yes Pepeoi was charging $40 for the password to his files :( his file did not work anyway!! :(

Still looking for info on how to do this manually with winOLS. stuck. :( Thought info on a opel EDC16 would be everywhere!