DCM1.2 problem

[tihiuvek]

Hope that someone can help.
I got ecu DCM1.2 broken due the crash impact of the car.
I found second hand ECU, tried virginise but my CAN Clip can only see the version HW and SW.
As it is not possible to read old ecu from car (totally psychically broken) can someone post flash and eeprom from same ecu DCM 1.2 year 2006. I have to say that my new ecu is from year 2009.
In attachment are dumps (eeprom + flash) read it by Galetto and external programmer.
Thanks!
208013

[alfabit]

Yes, it is possible virgin your sh DCM12. Let alone the 29F400, the key code is in the 95160.
This is your " code " bin virginised in attach. For me worked, written in a sh DCM12 and learned the old car keys.

But very weird, " totally psychically broken " means not even that small 95160 can`t be recover from the old DCM ? 29F400 i really can understand, could be broken by the impact, but that small 95160 ? Could not recover ? It`s all you need for keepeing the old codes ( even injector codes are there )...

[tihiuvek]

ECU was broken and owner trow it to garbage (at least he told me that).
There is no 29f400 in these unit !
I tested your fail but it is the same problem!
I belive that problem is in internal flash ST10280.

[alfabit]

There is no 29f400 in these unit !
I tested your fail but it is the same problem!
I belive that problem is in internal flash ST10280.

I agree with you, no 29f400, ( big 512kB ) flash inside ST MCU ( for injection maps only ). Immo code is in 95160, i can give you the code Delphi TRW serials : 8200513113 / 8200593576, Mfd : 09.2005
For me is working on my car, that old sh ECU cleared. Virginised exactly i did in the flash posted above.

[tihiuvek]

Can I have file?

[alfabit]

Ok, i send you my file.
If not working, means different sw version for the two ECU`s, both DCM12 but software different . Factory often uses changing sw " without notice ", only a S/n on the case, only diag tool shows sw homologation number.
Pass sent on MP.

[tihiuvek]

Thanks Alfabit!
Your file is correct!
Best regards,
Tihi

[emrej]

Ok, i send you my file.
If not working, means different sw version for the two ECU`s, both DCM12 but software different . Factory often uses changing sw " without notice ", only a S/n on the case, only diag tool shows sw homologation number.
Pass sent on MP.



password, please

[KOMUTAN]

Can you send me the PASS please.

[mycarelectronic]

password please