sagem S2000-3E help please

[autokey pro]

Hi mates,
I have this peugeot 206 with sagem ecu s2000-3e with eeprom 95080.ecu does not accept configuration and car does not start.
the dump of my ecu is not good.please i would need a good dump for this ecu not matter if it is immo off or not.
thanks in advance,
Regards.

[autokey pro]

here is the corrupted dump

[autokey pro]

Hi mates,
please i still need a dump for this ecu.
thanks in advance,
Regards.

[Zmann]

your dump looks fine to me. the problem could be somewhere else. but you can use this (http://www.digital-kaos.co.uk/forums/f178/p307-immo-off-sagem-s2000-181444/) immo off dump.

[Crash-100]

Dump good CRC OK if you need pin write me to PM

[autokey pro]

Thanks mates for you support,my original dump is locked,configuration is lost and when i try to re-configure the ecu i get (error).I replace the 95080 but it still the same.
I used an immo off dump for sagem s2000 (but not sagem s2000-3e) so the car start but with some wrong configurations that i can not change because the dump i have used is not the same of the ecu i have.So i still need an original or virgin dumo for sagem s2000-3e
Thanks in advance.

[Zmann]

maybe I'm wrong with s2000-3e but I could reconfigure to some other s2000-xx even on to the mentioned immo off dump by PPS.

[dell66]

Here the 95080 dump sagem s2000 psa test spans more than one computer running 100/100.
pass in mp

[autokey pro]

Thanks mate,
This car has a mechanical accelerator not motorized so the ecu has 3 raw of pins in each plug.Engine is KFW 1.4 and i still need a dump for it.
Thanks in advance.

[metercar]

test this is good ori file

[aparni198]

if you cant configuration your ECU i thinks that you need configuration your BSI first then the problem will be fix

[benguessoum]

hi all
put all dump fffffff and telecode with pp2000