Read and write via obd VW Crafter 2.5 TDI CR 2008 need help .

[overs0ull]

Hi all .
I want to read and write via obd VW Crafter 2.5 tdi CR 2008 edc 16cp34 to remove dpf and egr .
Can i read it whit mpps v12 to read and write it - i don't see the protocol for edc16cp34 (can i use other for 3.0 TDI edc16cp34 or something like that )
I have bdm 100 and galleto v2 clone v52 and others . (i am little afraid to use bdm soldering for that i want to try via obd ) , and i waiting a kess v2 soon .
Thanks for a helping .
Regards .

[perovuk]

read ful bdm after that you can try whatever you want,you have insurance

[quattrotr]

MPPS won't work, FGTech2 can do them tested on cars, takes about 10min to read and programm...

[moky]

tested last week with mpps and kess v2 no work and fgtech work...but test mpps perhaps work on your car...

[overs0ull]

ok i will test it whit mpps only to download the file from the eku if is full 1mb file i will try to write , but i thing to use galleto 2 v52 clone to be sure cause i don't wont to play whit my luck :D :D :D .
But when i open the crafter in mpps v12 i see only edc16u1 or u31 or other not even edc16cp34 - a mean can i try to read it whit edc16cp34 protocol from other car like audi a6 3.0 tdi edc16cp34 or i will have e problem , or direct whit galleto 2 clone to read and write .
The galleto 2 clone will work via obd - write .
The reason to wont that is how i say i am little afraid from soldering on bdm , and this crafter on my friend is driving every day and he need of it , and whit obd manipulation will be great and fast to not slowed him for i ask you.
Regards .

[moky]

No problem with good fgtech

[javilette]

mpps works no works mpps clone

[overs0ull]

My mpps v12 is not clone but not have this protocol for crafter edc16cp35 , only the galleto v2 v52 is clone and bdm from my all stuffs .
But i hear the can read and write it whit other car protocol edc16cp34 - for that i ask are will help or use galleto 2.
Regard

[serguei]

Galletto 2 done via OBD without problems.

[overs0ull]

thank a lot for helping me all of you .
Serguei - that help me really ,really now i know i can do it via obd with galleto 2 , cause i see from the picture - don't have any problems .
Thanks all
Regards and you are the best .

[pablo1971]

yes...ive got to put my bit in.....fgtech2 works a TREAT.......done loads of them,