BMW CAS 3 0L15Y 9217854 2092831950 need FLASH 9262360

[Artjom]

Hallo guys, I need help .. dont need to be for free... willing to pay

Have here a problem with CAS 3+

I read and wrote eeprom to that cas after km was made with X-Prog.

Now the CAS is dead .. i found out that the problem is in flash data ..

Here the data of the CAS

Car Access System 2 / 3 (CAS - 9287534)
Serial number - 292831950
Program.: Date Version
25.04.2006 6112233
27.02.2012 9262360

Partnb: 61.35 9217854-01

here i attached the eeprom of the cas .. the read out damaged flash 208870208870

[raimi.s]

part number from label please

[Artjom]

Partnb: 61.35 9217854-01

[samyboy]

I need same flash file please

[robert54]

Try this flash,263853

[samyboy]

thanks i will test right now and let you know

[samyboy]

no , didnt work , any other solution please

[amir_82013]

Hi
my friend BMW Part number your CAS of dump: 9.262.360
and car 10/2009 E61N 525d Touring M57N2 Europe Left hand drive N (For vin:C145834)
(BMW p n DDE: 8.509.034)
Color Car: Black (code 668)
odometer: 194999 klm
DDE code: D3E5E1
EGS code: E940
Please tell me or post a pic of soldering xprog to cas. for reading cas , xprog detected mask 0L15Y ? selection item correct ?

[samyboy]

please do you have a flash file for this cas
BMW Part number your CAS of dump: 9.262.360
this my cas eprom file and corrupt flash file

please help car is completely dead while updating cas

[bearheroes]

before asking flash file you should know if your eeprom is encoded or not...if it is you need a flash version>43...
so don't use whatever file you find...it will work ONLY by luck.

[samyboy]

hi
what you mean by eprom encoded ? and how can i now if its encoded ?
also when you say >43 , do you mean istap v43 and newer ?

[bearheroes]

your eepom is encoded.you need cas3+ flash fiile.

[pepsitosy]

Hi bearheroes
I am in this case too.
Pls help me which Cas3+ flash i should use in this case.
Tried with almost flash (Ex: 9262360...) but can not.
Maybe 9395656 can but i can not find.
Thank for your help

[sofy]

please do you have a flash file for this cas
BMW Part number your CAS of dump: 9.262.360
this my cas eprom file and corrupt flash file

please help car is completely dead while updating cas
Samy ... what tool u used to read this eep/flash?
if use R260 u can test flash by cas3 dump in my folder..
if use R270 u can test flash by cas3_flash con dump in my folder also.
maybe Artjom can test the same also
Good luck

[icogsm]

try thi repair flash and report
flash is same you SW!
B.R.