corolla 2009 ecu corrupted

[ttzag]

hi all
have a corolla 2009 some one corrupt the dump in Ecu before.
Ecu 89661-12E81 it's near engine(h56)
Immo box 89780-12240 (93c66)
626886-000
I have only the dump on immo, some one can give me a vergine dump for ecu please?
Car with one master key and not start
http://db.tt/tCtrJ6n7

Thanx in advanced




Sent from my GT-I9300 using Tapatalk 2

[MilanToyota2]

hello my brother, your dump is not corrupt posted the data key

[ttzag]

The dump was posted is not corrupted this dump is for immo .
I need a vergine dump for ecu cuz the original dump was cleared by some one before me .

Sent from my GT-I9300 using Tapatalk 2

[MilanToyota2]

here is my brother, I have not tested

[ttzag]

here is my brother, I have not tested

Ok thanx will test it and post result

Sent from my GT-I9300 using Tapatalk 2

[ttzag]

dump not working even if i add a new key
fault code is B2795.
tried to syncronize with g-scan not work .
add key by sbb not work .
add key by tango by dump not work.

any other solution please

Sent from my GT-I9300 using Tapatalk 2

[rashid01]

b2795 unmach key code this error code is not for ecu syn this mean key is not register in immo box need to check key is ok if ok register agine

[rashid01]

when u put key in to ignation security light flashing or go off? if go off then need to chack immo to ecm if flashing need to chack key to immo

[MilanToyota2]

the brother, posted dump ecu

[ttzag]

security light flashing when ignition on and off and when key out of lock.
the story is :
Somebody tried to steal the car before but could not and then came the owner of the car and tried to start it , he cant.
now i tried to register the key it faild then i remove the ecu and read h56 i see there is no data on it , then remove the immo and post here the dump (93c66)

Sent from my GT-I9300 using Tapatalk 2

[rashid01]

Frist u must register key in to immo post 93c66 dump and 4d key data

[ttzag]

the immo dump in first post
key data
datastream page 4
7E EC E2 5B 00 00 00 10 48 4C

Sent from my GT-I9300 using Tapatalk 2

[ttzag]

@MilanToyota2 your dump is for 4c transponder this ca is with 4d id67

Sent from my GT-I9300 using Tapatalk 2

[ttzag]

here is dumps ecu and immo
ecu h56 read it as 93h56 rohm

[rashid01]

I dont know why u read and need ecu data even u car scurity light flashing during ignation on or key in ignation

[ttzag]

light is blinking when ignition on what does that mean?
fault code in immo is B2795 unmatched key code.
no fault in engine ecu with diagnostic.
car with one original master key , i tried to syncronis with techstream it faild with the first procedur.

Sent from my GT-I9300 using Tapatalk 2

[rashid01]

Call me via skype

[rashid01]

Frist tell me how crate that problem

[ttzag]

some one tried to steal the car but he cant start the engine then he leave it.
he not cutting any wire in the car and every thing is ok .
i think the dump in ecu is not good but the strang thing is that no fault code on ecu.
thanx

Sent from my GT-I9300 using Tapatalk 2

[achaccha]

Dear Friend
The two files are fine, just that you have to use a key to program 4D-ID70.
luck

[rashid01]

U say that dump of ecu is not good or wrang ok if ecu dump is wrang or good u no need bother about ecu even scurity light go off

[rashid01]

If securty light go off than car not start then u see ecu othe wise problem in antina immo key or wiring if u want to start immo off it is very esey immo off start

[yssf]

this used 4d67,post your key data and i'll add it in dump for you

pg1:b2 or 53
pg2:??
pg3:?? ?? ?? ??

[ttzag]

my friend you dont understand me ( maybe my english is poor ) please read carefully.
I said I THINK ecu dump corrupt maybe yes maybe no . The light blinking every 2 second even if ignition is on . Even if key out of lock cylinder.
and I making a new transponder 4d 67 by immo dump and car not start , then add a new key with sbb (by obd ) key added successfully but car not start . the fault in immo is b2795 and no fault code in ecu .
Car came to me with one original master key with remote . I need someone that confirm the ecu dump is good .
Thanx to all

Sent from my GT-I9300 using Tapatalk 2

[rashid01]

209506 readey to start

[rashid01]

brather check pass in inbox

[ttzag]

ok will test it and let you know

[achaccha]

Please post the VIN number of the vehicle. that way I'll tell you that the key is you need exactly.
I analyze other data with the VIN number in order to start the vehicle.
regards

[ttzag]

Please post the VIN number of the vehicle. that way I'll tell you that the key is you need exactly.
I analyze other data with the VIN number in order to start the vehicle.
regards
car away from me now ,, tomorrow i will post the vin

[rashid01]

for wich country made for thaty car?

[ttzag]

No VIN.....

Sent from my GT-I9300 using Tapatalk 2

[ttzag]

Car start but with immo off
Thanx to all especially for rashid01

Sent from my GT-I9300 using Tapatalk 2