Stuck at no ca found

[exoska]

hello all
while i was searching for an answer i found that this forum stands out, with most questions replied and all. i hope that i can find my answer too.

well i have a dm800 hd pvr(clone), and just because i am curious i flashed the ssl84b over my ssl76. after a reboot without installing the proper image for the ssl , i had the error no ca found. i tried dreamup but it did not work. after uploading the flash script the machine boots to no ca found before the flash button is enabled. i found out that yassinov's ncf repair tool(2.5) was good for this job so i gave it a try. i tried all the available ssls on the software but after it says it's done it reboots to ncf state again. i was able to connect to the web interface after it finishes whatever it does and it was displaying ssl59, just for that time being i suppose.

so after that i have optiflash tool by the same guy a try. i tried the recover from ncf and update bootloader options with a proper ssl for the device. well it did update the bootloader, at least that is what i saw over the no ca found error. i tried to update to lower versions(down to 75). and i also installed a ssl84b image to get it working. it flashed ok , but no ca found was still there.

so here is the long sad story, i m stuck, can't watch my premiere league history channel, cant see the male lion's balls under the sun(just can't shake it out of my head-disturbing) . i hope you guys can tell me what i am doing wrong.

thanks in advance.

[southpaw]

is the box deffo a "sim2" type sim mate? has it got a sticker on unit saying so, there is a few sim types knocking about now, estar, Ferrari, sim2 , a8p , and each team needs to have its corresponding modified image installed (not interchangeable), if you have checked and it is deffo sim2, then try a bl72 image to get you started, these usually flash and boot without issue , good luck and let us know how it goes pls

[exoska]

is the box deffo a "sim2" type sim mate? has it got a sticker on unit saying so, there is a few sim types knocking about now, estar, Ferrari, sim2 , a8p , and each team needs to have its corresponding modified image installed (not interchangeable), if you have checked and it is deffo sim2, then try a bl72 image to get you started, these usually flash and boot without issue , good luck and let us know how it goes pls

foa , thanks for your response,

it's not ferrari i believe , since the ferrari ssls failed and before i fd it up i saw 76-rc1 kind of ssl from telnet connection.

i will give the bl72 a try but two things, first where can i find the bl72 for a clone, and will i have to install a proper image for that? and if so should i do it before loading the ssl or after?

thanks again.

[reaper101]

DREAM ELITE clone bl 72 - Downloads - Digital Kaos (http://www.digital-kaos.co.uk/forums/downloads/images/2/dream-elite-clone-bl-72-1101/)

this is clone image for dm 800 bl 72

[exoska]

DREAM ELITE clone bl 72 - Downloads - Digital Kaos (http://www.digital-kaos.co.uk/forums/downloads/images/2/dream-elite-clone-bl-72-1101/)

this is clone image for dm 800 bl 72

thanks. the link on this site is dead, but i found this : dreamelite-dm800-bl72--mfaraj.nfi (http://www.mediafire.com/download/z4cmjqd1mzi/dreamelite-dm800-bl72--mfaraj.nfi)
i guess it 's the same file.

it seems it's not a bootloader nfi, so will this image update the bootloader too? i can only feel that it's a silly question but i still need the answer :)

[digicon]

Always better to flash the bootloader first then the image just to be on the safe side

[exoska]

Always better to flash the bootloader first then the image just to be on the safe side
thanks digicon,

so i will need to find the ssl72 now right? the link above is for image only i think.

[exoska]

and i think i must use the optiflash during this process. dreamup won't recognize the device after it uploads the flash thing.

[digicon]

and i think i must use the optiflash during this process. dreamup won't recognize the device after it uploads the flash thing.

Try a different version of Dreamup have a look in the download section which has Dreamup, Images and Bootloaders:

Dreambox - Downloads - Digital Kaos (http://www.digital-kaos.co.uk/forums/dlcat-dreambox-1/)

[exoska]

hello, thanks a lot to all of you. i used optiflash and bl72 worked like a charm.
it s pretty old, and i think it lacks the cccam(i hope i spelled it right) , just one opinion is enough for me, which image should i go for now, considering the fact that this is clone device.

also i would like to make a donation for this great community's expenses if i could, please let me know how.

[exoska]

i tried to install . (http://cccam-exchange.com/threads/20667-THE-BEST-IMAGE-Merlin-2-Excalibur-1-6-dm800-V-3-by-OLINDO?p=83213&viewfull=1#post83213)............................. ...................... but i got the no ca error again. it's a clone image afaik but i still get this error.

[chic.]

try again with sunray-flashup, and dont put a tick in the( use network) when you flash the ssl dont reboot the box, flash the image then the ssl again

[exoska]

trying now. sorry about the external link.

[digicon]

And here is Sunray Flashup in case you need it in this post here: http://www.digital-kaos.co.uk/forums/f205/r01-no-ca-error-found-se-226880/#post1245954

[exoska]

i tried to use sunray with nfi non network mode. it did not help.

the way i did it was to flash the 84nfi , then the 2.01 image for clone and then the ssl again, without a reboot.
i got a no ca found again. and only the optiflash can help me flash the 72bl to it so that i wont see the no ca again. i m not sure what i am missing..

[exoska]

And there are bin and ipk files. Am I supposed to use them during this stage?

[reaper101]

you could try this it has bootloader 84a included just flash over the network if you can

blackhole 1.6.6 dreambox 800 hd v3 - Downloads - Digital Kaos (http://www.digital-kaos.co.uk/forums/downloads/images/2/blackhole-1-6-6-dreambox-800-hd-v3-2444/)

[exoska]

you could try this it has bootloader 84a included just flash over the network if you can

blackhole 1.6.6 dreambox 800 hd v3 - Downloads - Digital Kaos (http://www.digital-kaos.co.uk/forums/downloads/images/2/blackhole-1-6-6-dreambox-800-hd-v3-2444/)
thanks reaper, so this is good for clone right?

[southpaw]

thanks reaper, so this is good for clone right?
there is no image that's good for clones mate. as I said earlier each clone team has there own modded image to run on there sim types only, you need to establish the sim type then all will be gravy :top:

[exoska]

i guess mine is 2.01, i read somewhere saying that ssl76 can only belong to sim 2.01-that was the last image flashed before i killed it. and i am probably wrong about that too, no surprises.
man i am a server guy yet i cant do # about these stuff. drinks on me, when i get to see some picture on tv.

thanks again.

[exoska]

well, my man reaper's image failed too. same error. after flashing bl72, i flashed this without doing anything. then the same pretty error.

[exoska]

guys, i can t believe the shit i went through. my sim is ESTAR. i was trying the wrong sim images all the time, and wasting your precious time too. nothing like estar was written on anywhere inside the box. i was just trying the dreamup with enforcer and it was all throwing file to big. and on some forum i read that that s a usual estar sim problem, not sure if it makes any sense. well i tried a ssl84 from estar sim's website and it ran. i was not happy at all, but cursing intensively.

thanks to you guys i dig my way from the grave.

thanks a lot.

[digicon]

The main thing is you now know what sim you have in the receiver as there are 4 types : Ferrari-Sim2-Estar-A8P

[exoska]

The main thing is you now know what sim you have in the receiver as there are 4 types : Ferrari-Sim2-Estar-A8P

thanks a lot. now i need a proper up-to-date image for estar sim on my poor clone dm800.

[exoska]

well it seems Estar Box - DOWNLOAD - Estar SIM for 800HD (http://www.e-star-sim.com/en/down-sim800.php) the converter here can convert different images to estar images. i managed to install a new image using this. wov :)