BDM Adaptors for EVC - BDM100 etc, were to buy

[pulsar2000]

Trying to locate made up EVC adaptors Not the chinese ones please, want made up ready to go,
given up on the chinese solder adaptors, any one have a set for sale ideally like Full set of BDM Probes / Adapters - CMD, K tag, BDM 100, Dimsport, EVC, FGTech | eBay (http://www.ebay.co.uk/itm/Full-set-of-BDM-Probes-Adapters-CMD-K-tag-BDM-100-Dimsport-EVC-FGTech-/261209627608?pt=UK_Diagnostic_Tools_Equipment&hash=item3cd14e9bd8)
maybe a euro seller can help me

Thanks

[ominimicu]

I soldered my china ones...try autodiagtech.com
How much for your old china adapters?

[niwat_spp]

very good productCarsung.net (http://www.carsung.net/en/ProShow.asp?ProID=1056)

[lewich]

I am also looking for these, I have the china ones but trying to get my head round how they work, if someone could help me that would be great. The bosch ones for example have 5 pins per row, so 10 pins total. However on all the diagrams you need 12 pins?

[pulsar2000]

no you use two rows of 5 on the bosch other 2x2 dont need,
any more Eu Suppliers could do with asap, a nice set for my BDM

[J_amb_o]

very good productCarsung.net (http://www.carsung.net/en/ProShow.asp?ProID=1056)

Looks good quality actually, how much are they selling them for?

[ominimicu]

Chian ones work great....i can show you how to solder and get all the pins aligned...

[J_amb_o]

yes but there are only 4 adapters which leaves a big gap in coverage.

[xanubysx]

Look at 10 BDM adapters Product Professional Tool (http://obdgroud.com/views.asp?hw_id=575) ...

[pulsar2000]

Chian ones work great....i can show you how to solder and get all the pins aligned...

id take you up on that, i done the Bosch one as had no choice, one on the bench, I would like to get the marelli, siemens & Delphi ones done also, so ready for when the OBD fails, have you got a How to you can post, would be great or PM, Thanks

[ominimicu]

When i get home i ll post a tutorial for bosch and delphi to do them perfectly also good for the others but a bit more difficult

[ominimicu]

OMg forgot about this...will do today or tmorrow.!!! aplogies everyone

[lewich]

Done!? :eviltongue:

[pulsar2000]

Yes sort of curious myself, even tho now ordered bdm1, 2, 3 adapter, from the Chinese all made up,

[ominimicu]

edditing video..and uploading to youtube..hold your panties ! :;D

[lewich]

Pulsar, where did you get them from? Link? Also for what tool are you using? PM me if needed! Thanks.

Omni, LINK!

[lewich]

Come on :(

[ominimicu]

How to solder BDM adapters for FGtech 2 - YouTube (http://youtu.be/BTgzmb6Y6Uo)

[pulsar2000]

Good job, just done them all thanks, i thought you needed to line up & your vid shows perfectly how to do,

[ominimicu]

I just showed siemens beacuse bosch and delphi are so much easier. by brother has no idea about anything and actually did them ! ahahah.
Just solder pinsa nd alignem as best as you can...and then use any bdm adapter or similar to get them aligned. i also recommend soldering or glueing the additonal adapter on the srpings for better resitance.

[lewich]

Thanks for the video! But I still don't understand how the chinese ones work with the gap?

[pulsar2000]

lewich you have two rows of 5,
you go in Bdm to the right leaving other two rows untouched the extreme left not touched,
look at your fgtech diagrams,

[lewich]

Thanks, I understand what you mean. Do you need to unsolder any pins? Or all 10 used? FGTech states that pin 2,3 and 5 arent used?

[ominimicu]

some are not used...but i like having it complete!

[mexanico1971]

I made that in some way !
but was nice to make the video for other see !

the only that I do not read by bdm was IAW mjd8 I take out the resistor but no luck !

anyone know"s the solution ?!
regards

[pulsar2000]

Thanks for the video! But I still don't understand how the chinese ones work with the gap?

see what you mean now, the china 2x5 rows works ok, i also tested new BDM adapter with Gap same ECU EDC16, Both work ok, so how come ? the 5x2 row works ok ?? technically shouldnt as only porst & 12v correct, 3.3V & VF1 not covered by pins,
anyone knew why ?? head on bdm china wired same to look at apart from theres no gap, 211351

[lewich]

So you tried the China adapter with 5x2 rows, with it on far right leaving 4 pins unconnected at left and worked okay?

[pulsar2000]

yea both types work ok, 3.3v & vf1 not touched on ecu pads as every row to right used with the 5x2 china as no gap.
bit confused at this as cant see how it works but read with BDM100 both sets of probes same result, i can only assume don't need all connections for read / write ie 10 pins total...
hope someone can clear this up so i understand why / how
edc16c34 i think i tried

[ominimicu]

It does not all pins are used. That is why both work

[lewich]

So do you need to solder all pins to the board?

[pulsar2000]

Lol me 2 :joyous:
im assuming Bosch edc, variants maybe some need all some less, but in my thoughts the chinese 5x2 only the 2 at the right are correct, then the left are all wrong as theirs a gap and 2 are touching, so offsets everything ?? Go figure

[mugatu]

any person working with adapters carsung bdm, we could discuss how they work, if they are 100% functional thanks.

[ominimicu]

i testd china adapters and work perfectly....so who cares? you can use a multimeter and tst those pins that lead nowhere...and eliminate them

[lewich]

Ominimicu, I just noticed the second video you uploaded, that has made it very clear for me thanks. Only question I have was do you need the power supply in between the two ribbon cables? Where can I buy this?

[ominimicu]

You need the power supply on BOSCH ONLY ! you need that middle adapter if you have CMD, dimsport or alientech bench. For EVC bench no need.
THe thinghy came with my FGtech when i bought it!

[lewich]

I have FGTech so can I power the FGtech with power supply and plug ribbon cable directly from BDM board to FGTech? Or do I need that middle board?

[ominimicu]

you need the middle board!

[lewich]

Thanks! You've helped alot!

[J_amb_o]

any person working with adapters carsung bdm, we could discuss how they work, if they are 100% functional thanks.

They only work with genuine BDM100 by EVC which has a totally different pinout to CMD Clones.