PDA

View Full Version : Smart ForFour Colt line K, read Flash



Gizbern
20th July, 2013, 07:09 PM
Where is K line in ECU Smart CDI ForFour or Colt ?
I connection to OBD 7 to pin 43 in ECU, but not work
I like to read flash
Thanks

wsc
20th July, 2013, 08:25 PM
-Pin 1 Power Supply
-Pin 27 Power Supply
-Pin 51 Kline
-PIn 2 GND for EDC 16C33

Good Luck friend :)

Gizbern
21st July, 2013, 01:08 PM
Thanks!
BOSCH EDC16+/EDG1
MPC563/RevB
/20 08.07.2005[
:1037502270
:P339/C65:0000D240
I can't read flash
I get error: ERRORE CHANGE_SPEED_READ
Other Smarts I read ok
I use Galletto 1260
Thanks!

kennfeld
21st July, 2013, 03:05 PM
no need of kline you must read over can

the car has no kline wired

wsc
21st July, 2013, 05:34 PM
I suppose xprog-m can do the job also
byeshooter for sure and maybe Fgtech and MPPS
regards
WSC

Gizbern
21st July, 2013, 09:45 PM
I connect by K line
I can't read flash

kennfeld
22nd July, 2013, 11:39 AM
car only use CAN .... no kline on that car's even the petrol are can only cars ...
i own both cdi and turbo petrol versions ...

Gizbern
25th August, 2013, 01:35 PM
Now, I read by CAN by MPPS
I have the same problem
Maybe I must read by boot mode ???
Thanks!

wsc
25th August, 2013, 05:27 PM
Mate use k line like I told you
use byteshooter connections

Gizbern
25th August, 2013, 07:37 PM
I use this connection, and K line by MPPS
I have the same problem.
Thanks!

Gizbern
8th October, 2013, 05:29 PM
solved by Galletto 2

AMT-70kW-DPF-
1037502270:P339/C65
WME4540011B126625.
BOSCH EDC16+/EDG16C33-
PC563/RevB
08.07.2005

kennfeld
8th October, 2013, 10:03 PM
i had this car for years
cmdflash do them fine

also when other tools crash the car ...

Gizbern
15th October, 2013, 09:23 PM
I read Smart 451 and 454 CDI
Is it file ok?
It is very small map.

kennfeld
15th October, 2013, 09:28 PM
Size of forfour map is ok but only for OBD work
is you need to do bdm you need to read the bdm file

Gizbern
5th November, 2013, 09:29 PM
I like to read Smart ForFour ECU petrol 1,3
I use Piasini, but not connect.
I try by; K line pin 121, CAN, OBD
What is wrong ?
Thanks!

kennfeld
8th November, 2013, 09:10 PM
I like to read Smart ForFour ECU petrol 1,3
I use Piasini, but not connect.
I try by; K line pin 121, CAN, OBD
What is wrong ?
Thanks!

worked fine with with piasini 4.3
forget obd with clone ....