View Full Version : blaupunkt radio-navi code
yeager
21st July, 2013, 12:21 PM
hi, can someone help me whit this radio code from car octavia2, chip is 95320? i find someone whit nio4but cannot that is right or no.
i find 9283
210105
yeager
21st July, 2013, 02:49 PM
Code is wrong, i need a 5 digit code...
kappa1
21st July, 2013, 03:16 PM
Try code >>>>49571<<<<
yeager
21st July, 2013, 03:33 PM
Try code >>>>49571<<<<
wrong code...
nigrou
21st July, 2013, 03:41 PM
see here code in fis
-= CODEDRADIO =- Base navigation (http://codedradio.info/?i=bn&st=1k0+035+198)
yeager
21st July, 2013, 03:49 PM
see here code in fis
-= CODEDRADIO =- Base navigation (http://codedradio.info/?i=bn&st=1k0+035+198)
nod32 block this site...
nigrou
21st July, 2013, 04:33 PM
nod32 block this site...
:eviltongue:
yeager
21st July, 2013, 04:38 PM
very interest, it show code 0000-1999, but this radio need 5 digit code...
here is picture
http://www.nzbwereld.org/?page=getspot&messageid=Ap8zopFOXpQT1oITw9inq%40spot.net
yeager
21st July, 2013, 07:32 PM
sorry for all, i need 4 digit code...
210146210145210144
kappa1
21st July, 2013, 09:18 PM
Read fis 24c32 and post here
yeager
21st July, 2013, 10:43 PM
Tomorrow check it again, i find only 95320 in it...
yeager
22nd July, 2013, 08:21 AM
No 24c32 in this radio, only 95320... Is it possible tyrn off code?
mobilart
22nd July, 2013, 10:18 AM
If you have 2 days you can not find the 24c32 in FIS do not torture yourself or radio .. ..
Do something else ..
audiopoint
22nd July, 2013, 11:20 AM
No 24c32 in this radio, only 95320... Is it possible tyrn off code?
look here http://www.digital-kaos.co.uk/forums/f176/fis-reading-writing-howto-336526/
yeager
22nd July, 2013, 11:42 AM
shit, i dont reade post properly, i dont search for 24c32 in FIS modul, but in mother board....
yeager
22nd July, 2013, 05:38 PM
Fis have eep st 258 ez716 what us this?
kappa1
22nd July, 2013, 06:15 PM
Hi look here for ready fis
yeager
22nd July, 2013, 06:29 PM
But i dont have fis programmer...only upa, beeprog... so i need find eep...
kappa1
22nd July, 2013, 06:32 PM
you don't need programming look in navi calc_know how.zip
yeager
22nd July, 2013, 10:28 PM
i connect "programmer" to board, run sw navi.exe, set com port, put button reade, dialog show "reading started" but nothing happends ... i do anything wrong??
yeager
23rd July, 2013, 07:56 AM
can anyone tell me a serial port settings? Baud rate, Data bits....
Edit: i disassemble again the whole radio, and now im 100% sure that it dont have 24c32/16 eep
kappa1
23rd July, 2013, 08:15 AM
Hi onli work PonyProg PonyProg2000 - Download page (http://www.lancos.com/ppwin95.html)
Conect radio turn off pc and power on radio ready pony prog and select 24c32 (2432) and put this dump ok code 1828
yeager
23rd July, 2013, 08:34 AM
i have it, can you help me how can i connetct it to FIS? it dont have SLC or SDA...
edit: sorry i found it...
kappa1
23rd July, 2013, 08:37 AM
i have it, can you help me how can i connetct it to FIS? it dont have SLC or SDA...
Put pictures radio you to identify sda or scl
yeager
23rd July, 2013, 09:11 AM
ok, i reaade it whit pny as i2c 16bit eep 2432...
210392
kappa1
23rd July, 2013, 09:26 AM
Put dump send code 1828 is work 100% or expected on prusony for code original.
prusony
23rd July, 2013, 09:28 AM
Try -= 1993 =- .
yeager
23rd July, 2013, 09:40 AM
Put dump send code 1828 is work 100% or expected on prusony for code original.
code not work ...
yeager
23rd July, 2013, 09:42 AM
Try -= 1993 =- .
not work too ...
yeager
23rd July, 2013, 10:04 AM
it not possible disable code in 95320?? nyo4 have this options for other types, but dont cnow, that it will be work for me...
siti
23rd July, 2013, 10:26 AM
not work too ...
read signature @prusony
yeager
23rd July, 2013, 10:32 AM
i try it before, but the problem is, that this radio is from passat but now is in octavia2. i will be need vin from original car to get codes from prusony
yeager
23rd July, 2013, 10:45 AM
or i need other dump whit know code...
yeager
23rd July, 2013, 11:37 AM
PROBLEM SOLVED :D
i write this file to it, and radio work without code ;)
thx for all
yeager
23rd July, 2013, 12:22 PM
I talk about this file
Dump memory for CARAUDIO BLAUPUNKT NAVIGATION, 1K0 035 198C ( MODIFED ), , 24C32 (http://dump.elektroda.pl/download13809.html)
yeager
23rd July, 2013, 02:29 PM
bad news, radio dont need code, but not find radio stations and no sound in reproductors :(
yeager
24th July, 2013, 12:19 PM
100% WORKING SOLUTION FOR THIS PROBLEM :)
after a many hour of experimentation i resolve this problem :)
when i write a dump file from other 2432 eep, radio turn on, dont ask for code and work cca 15-30min after this go to "SAFE" mode ... cannot put code, must waiting and in a hour turn on again without asking for code.
What have i do? I copy code lines from other dump in which i know code, to my dump
20: F9 4F 23 E4 0E 10 BC C1 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: F9 4F 23 E4 0E 10 BC C1 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: F9 4F 23 E4 0E 10 BC C1 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
this lines have CODE 1821
After this, when i turn on radio it ask code, put 1821 and radio work now ;)
THX again for all who help me...
Faraday
24th July, 2013, 12:24 PM
you can edit your post instead writing one after another.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.