View Full Version : Tech2 Hardware
DiagService
24th July, 2013, 04:57 AM
Hi Guys I have problem with my Tech2 -Clone Have you any Ideea for this problem see on the Picture. Always when Tech2 connect on OBD in Auto and when I start the Motor Tech2 is Shutdown ... Thanks210540210541210542
milanoffracing
24th July, 2013, 06:46 PM
Some of cloned Tech2 devices have a problems with rebooting when you start to crank over an engine. Here is the solution for this problem, we need to change one Single Output Dc-dc Converter with the good one: Mornsun VRB1205LD-15W ,after this mod the rebooting is a history.210670210671
DiagService
25th July, 2013, 12:13 AM
Thankss Friend I have find MORNSUN VRB1205LD 15W NEW & ORIGINAL-in Other Electronic Components from Electronic Components & Supplies on Aliexpress.com (http://www.aliexpress.com/item/MORNSUN-VRB1205LD-15W-NEW-ORIGINAL/638199627.html)
Some of cloned Tech2 devices have a problems with rebooting when you start to crank over an engine. Here is the solution for this problem, we need to change one Single Output Dc-dc Converter with the good one: Mornsun VRB1205LD-15W ,after this mod the rebooting is a history.210670210671
MJRVR
25th July, 2013, 08:15 AM
Have you upgraded to a later software?
Sometimes you will have this error.
If yes try down grading to an earlier or original software.
Martin
DiagService
27th July, 2013, 11:02 PM
I have update Card 32 MB by Opel service
Have you upgraded to a later software?
Sometimes you will have this error.
If yes try down grading to an earlier or original software.
Martin
carradio2001
6th August, 2013, 02:48 PM
Use genuine card, not clone card !
Carradio2001.
mikolodz
16th August, 2013, 08:27 AM
Thanks, great solution
immomaniac
18th August, 2013, 01:28 AM
A question to tech2 ckone onwers.. Does it work.? , atleast 70% of wat original can do. Are u happy with it overall
I dont have tgat kind of money to buy n test it myself...
luis12
18th August, 2013, 02:54 PM
Mine works like original only have few times a problem when starting and is a false contact beetween VCI module and main scanner, two up and down movement and all ok.
sideshow
19th August, 2013, 02:14 PM
mine works fine too ive used it with tis2web and tis2000 and flashed afew gm modules cant complain
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.