PDA

View Full Version : Benchflashing trionic7 with MPPS v12 not working


pinch
24th July, 2013, 08:23 PM
I am trying to clone a trionic 7 ecu with MPPS v 12 and it reads ok, but writing says ok but nothing changes, its still the same when I read it again.I use a 13.6volt powersupply. What am I doing wrong ?
pinch
26th July, 2013, 08:16 AM
Ok, everything seems to change except IMMO and VIN info, why wont MPPS write that ?
quattrotr
26th July, 2013, 10:03 AM
Clone MPPS won't do that ECU.
pinch
26th July, 2013, 01:27 PM
I have manage to get it all to work except the VIN, that wont change but all other changes are working.
lewich
26th July, 2013, 03:49 PM
Pinch, do you have the info on how to read and write with the clone MPPS? I'd be interested in that if you would be so kind. Feel free to PM me if you prefer.

Thanks
viki300
26th July, 2013, 04:09 PM
get cheap can adapter and here everything you need to know how to http://socalsaab.com/suites/suites.htm
pinch
27th July, 2013, 08:19 AM
ECU connections 1,23,43 to +12 volt. 22,25,47 to ground. 19 CAN low. 66 CAN high. Choose SAAB 9-3 Trionic 7 in MPPS software and go ahead, 2min read, 5 min flash
zodiname
16th September, 2013, 09:43 PM
Trionic 7 with my MPPS 10.6 i have only correct id, when i try to read show "security access denied" , what is wrong? clone Mpps don`t do this ?