Opel EDC17C59 Read / Write ?

[darwins]

Hello Guys.

Can I ask for suggestion which tool, genuine or other that has been used to read and write Opel EDC17C59 ecu type good ?

Best Regards

Darwins

[darwins]

No one done this ecu ?

[fruti]

Mate ... What you wanna to do ... Tuning or something else ?

[darwins]

Just clone mate

[fruti]

Well i never seen edc17 clone for now. If there is tricore proc inside then i think only way if old one is damadged to bga change processor. From old one to new - used one

[darwins]

EDC17 can not be cloned ?

[fruti]

Not that i know ... :-)

[fruti]

What processor you got inside? Bga or pins?

[786mo]

You can clone some EDC17 Using X17.

But I don't think this is one of the few that can be cloned.

[darwins]

Hi Guys

Tried FG Tech today using the boot pin out below which I found in another post on DK.

Boot worked ok but FG Tech Clone would not unlock the processor. Tried TPROT V08 tool but still no go.

I can also confirm communication with Opcom / Tech 2 on the bench using the pin out shown.

I see this processor can be worked on with DataMan (http://www.dataman.com/dil48-lqfp176-zif-tricore-1.html)if removed, not sure if this will deal with all protected parts.

BR

Darwins

[darwins]

Thanks 786mo for heads up on this X17 tool. (http://magicmotorsport.com/shop/magpro2-tools/magk00012m.html)

Not listed for this ecu as you thought.


INFO ON DATAMAN

Device info:


Manufacturer: Infineon
Type: SAK-TC1767-256Fxxx [LQFP176]
8-bit bytes: 200000h (2,097,152 Bytes)
Organization: 200000hx8 bit
Algorithm: Specialized
Implemented in ver.: 2.97 or earlier
Modified in ver.: not modified
Package Info: LQFP(176) Body size: 24x24mm




General Info:


Flash module PFlash0 includes 2MB of PFlash memory - buffer named PFlash0.
DFlash includes 64kB of additional data flash memory - buffer named DFlash.
Supported address range:
PFlash0 - 80000000h-801FFFFFh, A0000000h-A01FFFFFh, mapped to 0h-1FFFFFh (buffer named PFlash0)
DFlash0 - 8FE00000h-8FE07FFFh, AFE00000h-AFE07FFFh, mapped to 0h-7FFFh (buffer named DFlash)
DFlash1 - 8FE10000h-8FE17FFFh, AFE10000h-AFE17FFFh, mapped to 8000h-FFFFh (buffer named DFlash)

Due to internal technical reasons of software the save file is supported only as Intel HEX file type, we are sorry for this inconvenience.
PFlash0 - 80000000h-801FFFFFh
DFlash0 - 8FE00000h-8FE07FFFh
DFlash1 - 8FE10000h-8FE17FFFh

[fruti]

Mate you yust resolder processor. I would not bother to read.... You cant write OTP where immo is written.

[darwins]

Thanks fruti, can't these Tricore ecu's be virgin reset for programming ?

At least this processor will be easy to remove and resolder back, but I'm thinking if there is a bad ecu or none available there will be nothing to resolder..

[fruti]

http://www.digital-kaos.co.uk/forums/showthread.php?t=351727

It was explaned here and some other posts... Area where is immo is one time programmable "OTP" that why you cant clone ... I was thinking to buy empty processor and write all data from old one to new. But there is a catch ... I send an email to elnec about buying socket for that proc. and bga also. But the answer was that there is not enough cosumers witch will be using this and to many work for develop program for writing and reading those processors. But i never try if you buy empty proc and program it back wia bdm.... This i will try if i get empty tricore :-)
Regards