Xprog-m version 5.3 whitout dongle.

[megasosio]

Hi to all forum. Im a newbie here but i think this is good for all, and for this i uploaded xprog-m 5.3 whit dongle totally desprotected to run whit any xprog 5.0 or 5.3 interface.
I tested whit xprog 5.0 interface and whit 5.3 interface and works ok.
The dongle deprotect its a casualty investigating process in my computer, but im not a cracker its very very easy to deprotect .

The complete folder structure is ***C:\Program Files\XProgDesktop.5.3\XProgDesktop.5.3***
Tested in tow laptos and three pcs. But same soft whit dongle and whitout it not work on some computers freezen always in "buffer initialisation".
The soft are password protected but i send in pm whitout problem to all.

[electrohicham]

can you upload version with dongle ?
thank you.

[megasosio]

Its the same version only 1 exe more thats is whitout dongle... if you run xx.exe needs dongle, if run xxx.exe dont nedd.

Dongle only hidde the xxx.exe, i unhidde.

[PSAXSEVOLUTION]

Friend can you share the password of file please.Best regards

[wahye]

you lost your time
all version with dongle , doesn't work without dongle and this update without internet is already posted here
Best Regards
wahye

[tecautomotive]

what is password thanks

[viki300]

can you send PW to me thanks

[megasosio]

i think y dont loose the time.. try my unlock 5.3 exe whit 5.48 your and maybe works whit more autorisations...
And if i loose the time... i think nothing has unlock the dongle for xprog 5.3.. and for me its great because im a total newbie

[wahye]

hi megasosio
you must be mak some space in your private message because it's full , and i can't send you any pm , delett some old pm from your inbox
i need your password , when you get some space in your PM just pm me
Best Regards
wahye

[x-tech]

PLEASE PASS. THANKS

[bearheroes]

your message box is full.
Please send me the pass.
Thank you.

[megasosio]

Now i have free space in my mail!!!!!

[miha99]

Hi megasosio, I try your soft with my xprog 5.0 and it works perfect, thank you again !

[bmwhunter]

Please PASS. Thanks

[Tereksaz]

can you make without dongle xprog 5.45?
Tereksaz

[sc202]

Please PASS. Thanks

[daniersms]

Can I have the pw please:joyous:

[wyz1056]

hi,can you say pass,thankS!

[legijaaa]

PLEASE PASS. THANKS

[aksimo]

Hallo works with 5.0 hw but new features not work like mac7 and so on :indecisiveness:

[binhminh410]

please pass
Thank

[baseel]

Please PASS. Thanks

[cocutanu]

Hallo works with 5.0 hw but new features not work like mac7 and so on :indecisiveness:

So, if this version is working the same way and same features as a 5.0 version what's the point using it ?
If nothing from the new official 5.3 version features are available basically we will have a "hard to install" 5.0 version. :)
In my case I'm stocked at "buffer initialization" message with software freezing at that point.
Tried this version on 2 laptops and one desktop computer with no luck passing this message when reading an 24wc02 eeprom.
Is any fix available for this message ?
BR

[daniersms]

:dog: I would like to test this to see what the difference really is if any--- but still waiting for the pw :blue:

[serg2000]

hi,can you say pass,thankS!

[aksimo]

So, if this version is working the same way and same features as a 5.0 version what's the point using it ?
If nothing from the new official 5.3 version features are available basically we will have a "hard to install" 5.0 version. :)
In my case I'm stocked at "buffer initialization" message with software freezing at that point.
Tried this version on 2 laptops and one desktop computer with no luck passing this message when reading an 24wc02 eeprom.
Is any fix available for this message ?
BR
For my 5.0 hw is no point to use only the 5.3 not so stable as my old sw :thefinger:

[spiridonas]

Hi please pass.... Many thanks in advance Spiros.

[912secured]

I have 5.3.8 files runnning on 5.0 someone make a place for me to upload i will put it there. Im me with a spot off site so I can upload and put a link.

[mardude]

Please password.
Thanks

[megasosio]

I know whit this version is no much gain respect 5.0 version but i crack the dongle protection :)))
I have news, i unlock the dongle protection of 5.45 whit the same procedure of 5.3 ,but not works whit 5.0 interface and ask for a update. This is no good news but if somenthig can upload eeprom of china 5.45 and program any hard whit 5.0 the dongle is not need to run and for them it will be free for all!!!
If something can read and upload eeprom of CHINA 5.45 i upload for free CHINA SOFT 5.45 WITHOUT DONGLE PROTECTION, not 5.45 original version, 5.45 china that is working whit china eeprom.

Thanks for all and for this good forum.


For all the password of 5.3 is *cacaculopedopis* my pm is full. Thanks again.

[erold]

Please PASS. Thanks

[serg2000]

PASSSSSS cacaculopedopis

[912secured]

The files stayed in the clear untill 5.3.9. Then 5.4 encrypted. Yes the mac7 is not in 5.0 but micronas and motorolla have all been upgraded. And with info about a new motorolla micro controller it can be added to 5.0. If someone has the firmware to the 5.4.? im shure everyone would be glad. If someone had hardware emulator you could use it to upgrade and get the new dump besides other ways. He encrypted the 5.4.X files. I run normal 5.0 and 5.3.8 bram gave info on how to do 5.3.x early editions(I bought legit update so im up to date still need good 12 to15 volt power for secured usb does not cover it x05). Theres no way to get 5.4 to run on 5.0 soft(you can add new motos data with it information). We just need a good 5.4 dump and were good. Need to buy a extra 5.0 and log the update and firgure how the serial is based on (pc,xprog etc).

[minimex]

Hi,
please pass.
Thanks.

...
I'm sorry for blindness by :pepsi:.
:joyous:

[racin-snake]

password is on post 32 mate

[viki300]

it didnt help me but old 5.0 sw works ok with this 5.3 Xprog

[Nio]

Hi to all forum. Im a newbie here but i think this is good for all, and for this i uploaded xprog-m 5.3 whit dongle totally desprotected to run whit any xprog 5.0 or 5.3 interface.
I tested whit xprog 5.0 interface and whit 5.3 interface and works ok.
The dongle deprotect its a casualty investigating process in my computer, but im not a cracker its very very easy to deprotect .

The complete folder structure is ***C:\Program Files\XProgDesktop.5.3\XProgDesktop.5.3***
Tested in tow laptos and three pcs. But same soft whit dongle and whitout it not work on some computers freezen always in "buffer initialisation".
The soft are password protected but i send in pm whitout problem to all..


Good function. Big thanks to megasosio.

[gselectric]

pass please

[gselectric]

thx it works but 05l28 mcu disapeared any ideas?

[minimex]

Hi.

Stocked at "Buffer initialization", option: Read. Ok: Write, Verify, Blnk, Erase.
What's the problem?
XP SP3 EN

[tisser]

mp please need to est

[pezao]

please pass thank

[autocargo]

Xprog-M V5.3, X-prog-M With Dongle

Xprog-M V5.3|X-prog-M 5.3 With Dongle : OBD CHINA, The best auto OBD tools supplier (http://www.obdchina.com/xprogm-v53-xprogm-with-dongle-p-1055.html?utm_source=forumseo&utm_medium=s100digital-kaos)

mb star c4 buy from here chiese cheap prices
FOR MB Star C4 : OBD CHINA, The best auto OBD tools supplier (http://www.digital-kaos.co.uk/forums/redirect-to/?redirect=http%3A%2F%2Fwww.obdchina.com%2Fmb-star-c4-p-45.html%3Futm_source%3Dforumseo%26utm_medium%3Ds10 0-digtal-kaos)

AUTOCOM CDP+ Pro for Cars & Trucks & Generic 3 in 1(Red)2012.3

AUTOCOM CDP Pro for Cars Trucks Generic 3 in 1 : OBD CHINA, The best auto OBD tools supplier (http://www.digital-kaos.co.uk/forums/redirect-to/?redirect=http%3A%2F%2Fwww.obdchina.com%2Fautocom-cdp-pro-for-cars-trucks-obd2-3-in-1-p-1590.html%3Futm_source%3Dforumseo%26utm_medium%3Ds 100digital-kaos)


This is third thread where all you are doing is post a link to your business. If you can't help members here please stop advertising. We all know where to buy our stuff if we need, no need for your links....

[siyadk]

So, if this version is working the same way and same features as a 5.0 version what's the point using it ?
If nothing from the new official 5.3 version features are available basically we will have a "hard to install" 5.0 version. :)
In my case I'm stocked at "buffer initialization" message with software freezing at that point.
Tried this version on 2 laptops and one desktop computer with no luck passing this message when reading an 24wc02 eeprom.
Is any fix available for this message ?
BR
did u solve it... ihave the same issue

[Baran79]

Please PASS. Thanks

[serg2000]

PASSSSSS cacaculopedopis

[carradio2001]

Only "Initialising buffer..." know this version. Nothing not work on Xprog-m v5.0

Carradio2001.

[smayer]

did u solve it... ihave the same issue
I have same problem, anyone know the solution???

[ricards99]

hi mr smayer,
had you resolve buffer initialisating probleme, i am in the same case
thank you

[Diag175elec]

PLEASE SEND ME PASS FOR X PROG 5,3 THANKS FOR YOUR SERVICE

[Diag175elec]

HELLO PLEASE SEND ME PASS FOR X PROG 5,3 THANKS FOR YOUR SERVICE

[smayer]

PLEASE SEND ME PASS FOR X PROG 5,3 THANKS FOR YOUR SERVICE

Do you need glasses ? read post #46

PASSSSSS cacaculopedopis

[Mijusa15]

Thanks!!! Work OK

[kakaya36]

PLEASE PASS. THANKS

[kakaya36]

Do you need glasses ? read post #46

PASSSSSS cacaculopedopis
thanks you

[4matic]

Hello All

I have xprogbox 5.45 soft without dongle. And china x-progM 4.5
After install 5.45, software want to update firmware of box. I know, i can kill device,but interested what do :)
I press UPDATE. And after successful update process, software 5,45 normally see device, read id, sn, but authorization left only basic.
And main question: how enable all authorizations? :) I know what auth get from inet. Or reflash back atmega to 5.0 version? Or anybody have dump for china 5.45 with all authorization?

[mahmod_q]

error password236532

[no__name]

cacaculopedopis this is ok pass-tested.

[super jumbe]

cacaculopedopis this is ok pass-tested.


It would be a good Christmas present if some 1 will download again only this time without pass please.

[no__name]

Lets try...

[super jumbe]

Lets try...

Works great merry Christmas you made life very easy thanks.

[mohamedkey]

Please PASS. Thankssssssssssss

[antonypaul]

thanks for the post how it work good ?

[belallllal]

thank you
plz pass

[vvv0713]

Pleas PASS

[smirnoff_rules]

l had it will search for it and upload right one

here no password

[dominic24]

Give me a PASS pls!

[CatalinBN]

Pass please!

Thank you!

[dmk]

Give me a PASS pls!

[alexis266]

Pass please!

Thank you!​

[thunder2]

hi
Can you send me pass please

Regards

[ljamert]

Hi, can you send me the pass pls, thanks in advance

[autotecnica1]

pass grazie per favore

[ibrahim74295]

password please and thanks also a newbie

[electronistul21]

is better use Xprog V5.55 is most stable

[usefi5961]

Please send me password.
Thanks.