Audi A6 2005 kessy problem

[slavisac]

Can someone help me repair this kessy. Nothing happens when I put the key in lock ,and when I connect the tester I got some strange symbols in place where VIN number should be.Also when I hit advanced ID I see a lot of strange stuff like programming attempts -68,successful attempts 70 etc...Inside kessy is 9s12 0l01y.Can someone help me repair this dump or give me dump with known pin so I can try and fix this

Thank you in advance....

[slavisac]

Anyone please

[Bllinda]

No one reads your thoughts ... More information about the machine and blocks

[slavisac]

Thans for reply Bllinda.It is A6 2005 2.0tdi.Problem is with kessy.I have corrupted eeprom dump.I have managed to read pin from ecu edc16u31 with vvdi but when I try to read kessy or learn key I get message wrong pin.I have read kessy with xprog-m and when I try to calculate pin from kessy it says that bpin is 65535 and the part where VIN and CS should be in eeprom dump I have FFFF....KESSY HW:4F0905852C SW:4F0910852.Can you help me repair eeprom dump

Thanks.......

[slavisac]

Anyone have virgin dump....please

[haroutioun]

Can someone help me repair this kessy. Nothing happens when I put the key in lock ,and when I connect the tester I got some strange symbols in place where VIN number should be.Also when I hit advanced ID I see a lot of strange stuff like programming attempts -68,successful attempts 70 etc...Inside kessy is 9s12 0l01y.Can someone help me repair this dump or give me dump with known pin so I can try and fix this

Thank you in advance....
Hello,
Dear, i thing the file size must be 2.00kb not 4.00kb so try read well with xprog .m

[slavisac]

With xprog-m 9s12dt256 size 4.00kb When you read it with avdi it reads only 2.00kb

[slavisac]

I am stuck my friends.Anyone that have the experience with this stuff....please

[koyot]

fvdi can not operate successfully the model

use etl to read mcu

[Bllinda]

Another try out for the vas-pc should help. Later, a used car lot used Kessy ... only after ekperimentuociau everything else, Etl_ xpr=m
Sorry for my english

[slavisac]

MCU was read with xprog,not with fvdi and the eeprom is still corrupted.Does anyone know can it be repaired or can I swap kessy lock with used one and how.

Thanks for reply

[tricoredc17]

Hi all!
Need help.
Search full- flash+eeprom 9S12DG256 0L01Y
HW 4F0905852 E/C/F/H

[Basti13]

Hello i looking for this same set full flash someone can help ??