need immo off of passat b6 me9.5 95160 eeprom

[Djtroliz]

95160 eeprom need immo off 211411

[jacostanzo]

Post flash dump

[Djtroliz]

i read by k-tag 211434

[jacostanzo]

you file off

[Djtroliz]

thanks bossy

[Djtroliz]

you file off http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/paperclip.png Attached Files

http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/attach/rar.gif off.rar (http://www.digital-kaos.co.uk/forums/attachments/f178/211451d1375105331-need-immo-off-passat-b6-me9-5-95160-eeprom-off.rar) (697.6 KB, 2 views)




i have no ideas not realy work mabie on passat b6 need to do somethink different have any ideas?

[jacostanzo]

you file off http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/paperclip.png Attached Files

http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/attach/rar.gif off.rar (http://www.digital-kaos.co.uk/forums/attachments/f178/211451d1375105331-need-immo-off-passat-b6-me9-5-95160-eeprom-off.rar) (697.6 KB, 2 views)




i have no ideas not realy work mabie on passat b6 need to do somethink different have any ideas?

This files is tested, you have other problem on car, why you are making immo off?

[Djtroliz]

becauce I swap ecu

[Djtroliz]

This files is tested, you have other problem on car, why you are making immo off?
i dont know why , i need to swap ecu , and in control unit fault code checksum erorr please need help thanks

[Djtroliz]

i dont know why , i need to swap ecu , and in control unit fault code checksum erorr please need help thanks


Tuesday,30,July,2013,12:20:15:55226
VCDS Version: Beta 12.10.5

Address 01: Engine Labels: 06F-907-115-AXX.lbl
Control Module Part Number: 3C0 907 115 Q HW: 3C0 907 115
Component and/or Version: 2.0l R4/4V TFSI 0030
Software Coding: 0404000318070060
Work Shop Code: WSC 00350 210 83392
VCID: 2E554855B9C0FF6E2C5
4 Faults Found:

005715 - Please check DTC Memory of ABS Controller
P1653 - 004 -
Freeze Frame:
Fault Status: 01100100
Fault Priority: 0
Fault Frequency: 9
Mileage: 222999 km
Time Indication: 0
Date: 2000.00.00
Time: 00:23:47

Freeze Frame:
RPM: 0 /min
Load: 0.0 %
Speed: 0.0 km/h
Temperature: 20.0?C
Temperature: 20.0?C
Absolute Pres.: 990.0 mbar
Voltage: 11.557 V

005642 - Internal Control Module Memory
P160A - 004 - Check Sum Error
Freeze Frame:
Fault Status: 01100100
Fault Priority: 0
Fault Frequency: 2
Mileage: 222999 km
Time Indication: 0
Date: 2000.00.00
Time: 00:23:47

Freeze Frame:
RPM: 0 /min
Load: 0.0 %
Speed: 0.0 km/h
Temperature: 20.0?C
Temperature: 20.0?C
Absolute Pres.: 990.0 mbar
Voltage: 11.303 V

005634 - Power Supply Terminal 30
P1602 - 002 - Voltage too Low - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 0
Fault Frequency: 1
Mileage: 0 km
Time Indication: 0

Freeze Frame:
RPM: 0 /min
Load: 0.0 %
Speed: 0.0 km/h
Temperature: -40.0?C
Temperature: -40.0?C
Absolute Pres.: 0.0 mbar
Voltage: 0.000 V

001299 - Incorrect Immobilizer Key
P0513 - 008 -
Freeze Frame:
Fault Status: 01101000
Fault Priority: 0
Fault Frequency: 1
Mileage: 222999 km
Time Indication: 0
Date: 2000.00.00
Time: 00:30:06

Freeze Frame:
RPM: 898 /min
Load: 34.5 %
Speed: 0.0 km/h
Temperature: 20.0?C
Temperature: 20.0?C
Absolute Pres.: 990.0 mbar
Voltage: 11.049 V


Readiness: 0110 0101

[jacostanzo]

Load epprom + flash from old and new ECU I can swap the data for you

[Djtroliz]

Load epprom + flash from old and new ECU I can swap the data for you so is not sence if old ecu was edc16 diesel new one me9.1 petrol one fsi ? :) don't ask why :) long story

[alclot]

so is not sence if old ecu was edc16 diesel new one me9.1 petrol one fsi ? :) don't ask why :) long story

Hi Djtroliz. Could you solve this problem?
Thanks in advance ;)

[alclot]

so is not sence if old ecu was edc16 diesel new one me9.1 petrol one fsi ? :) don't ask why :) long story

Hi Djtroliz. Could you solve this problem?
Thanks in advance ;)

[Tefocm]

EDC16 is Diesel and ME9.1 is petrol...its impossible on so many levels...

[audivwauto]

ME9.5.10 PETROL has a 95080 eprom
EDC 16U1 DIESEL ' ' 95160