PDA

View Full Version : need urgent full bdm astra h 150hp



ruffles1986
30th July, 2013, 04:58 PM
hello i need urgent full bdm read for opel astra h 1,9cdti 150hp edc16
hardware: 1037371868
sofrware: 0281011668
ppel soft nimber: 5518992
engine Z19DTH
i have a error at end of program and the car now not start.
thanks

lewich
30th July, 2013, 08:27 PM
Assuming you tried to write back the original? Checksums bad?

ruffles1986
30th July, 2013, 09:02 PM
Assuming you tried to write back the original? Checksums bad?
Hello friend the ecu was mapped and the owner want to sell the car, then i try to change file by OBD port with MPPS and at 100% appear error and now the car don't start(on MPPS soft appear automatic checksum for this ecu).

BrunoPT
30th July, 2013, 09:22 PM
Opens the ecu reads for bdm what remains and it sends me and send me also the original read by obd I create a full bdm for you

Regards

ruffles1986
30th July, 2013, 09:53 PM
Opens the ecu reads for bdm what remains and it sends me and send me also the original read by obd I create a full bdm for you

Regards
Thanks for help, i add two rar files, one with actual BDM info, and other with original file.

Micro info can be damage?? or only problem with flash?

lewich
30th July, 2013, 11:18 PM
Heard of a few problems writing with MPPS to that ECU. Do you have any other tools?

ruffles1986
31st July, 2013, 12:01 AM
Heard of a few problems writing with MPPS to that ECU. Do you have any other tools?
Yes i have Galleto FGTECH V52

ruffles1986
31st July, 2013, 09:15 AM
Hello, anyone have full BMD for this ECU??

lewich
31st July, 2013, 12:25 PM
Take it you tried writing with FGTech?

BrunoPT
31st July, 2013, 03:23 PM
hello,


I've been checking the files and they are all ok.
By bdm writes the original file complete and correct the cheskcumm in writing, must be ok.
These cars should never use mpps, I generally in all units EDC16 BDM and then do so by obd, if something goes bad I have the full backup :)


Reggards

ruffles1986
31st July, 2013, 08:53 PM
hello,


I've been checking the files and they are all ok.
By bdm writes the original file complete and correct the cheskcumm in writing, must be ok.
These cars should never use mpps, I generally in all units EDC16 BDM and then do so by obd, if something goes bad I have the full backup :)


Reggards

I read on forum very times edc16c9/c39 have problem to program by obd, but owner said me after the car was mapped by obd and don't have problem.(is trustworthy)maybe with other tool....

Yesterday at night i program flash by BDM port and process ok 100%, today i try ecu on car and start normally. Thanks for help