Audi RB4 dash 8E0920930J problem after battery replacement

[tihiuvek]

Hi,

Does somebody has experience with these problem?
Client replace battery and no needles, light on dash.
VCDS has read DTC 00576 - terminal 15 27-00 Implausible signal

I checked power supply on pin 2 and 3 of green connector everything is OK but problem still present.
Thanks!

[pepi]

Try to write another dump on 24c08 with the same brand just to check if needles will move up. After you will cary out programming.

[lupu_sandu]

Another dump in RB4 crypto? :))))
Just try and cry after :)

[mvekaz]

Read eeprom and try to compare with eeprom from another dash, same part number, maybe you can see something wrong in your dump.

[pepi]

Another dump in RB4 crypto? :))))
Just try and cry after :)
No need to cry if you have AVDI or DEJAVU. I do it without problems always.

[nirv]

Hello!

I know two other cases with exactly the same problem.
One of them is an A4 MY2002 with the 8E0920930J and the other one is an A4 MY2003 with 8E0920930R cluster.
The problem is that the cluster makes some kind of reset and its coding and all the Adaptation channels return to 0 value.
All you have to do is set the coding and all the Adaptation channels back to the original value and you should solve all the issues you mentioned.
I uploaded a map of the adaptation channels of another instrument cluster that you can use to set some values.
Of course that in some channels you have to set the values based on the car specs!
410542

Now you probably will get an annoying issue that I myself still don't understand and i am also looking for a solution with no results till now, it is the fuel range in DIS that starts to increase its value all the time you run the car and stops at 2000Kms (I suppose it is the maximum range possible in the DIS.
This is even more strange since the fuel gauge is showing the correct level in the tank and even in Vag-Com is showing the correct liters.

If anyone know how to solve the fuel range issue, any help would be great!

[nafnaf2]

Hello
Your problem is inside 24C08 ....... your file ?

Inviato dal mio SM-T805 utilizzando Tapatalk

[nirv]

Hello!

Here is the dump file of one of the the clusters having the fuel range bug:
https://0a7sgh.s.cld.pt

This one was taken from an Audi A4 MY2002

I know another case from an Audi A4 MY2003, but I can not find the dump file.

It would be great to solve this issue!

[nirv]

Here it is the other dump file, with the same fuel range bug.
This is a 8E0 920 930 R cluster

https://rx7o6s.s.cld.pt

[nirv]

I am still searching for a solution for the referred fuel range problem.
It is not an easy information to find.
Does anyone have an idea related to this problem?

Regards

[Nadisat]

look here
http://www.digital-kaos.co.uk/forums/showthread.php/532523-audi-a6-RB4-24C08-DUMP-NEED-REPAIR-8E0920930J

[nirv]

look here
http://www.digital-kaos.co.uk/forums/showthread.php/532523-audi-a6-RB4-24C08-DUMP-NEED-REPAIR-8E0920930J

Thank you for your help, but the reported problem is not directly related to the one described here.

I am almost shore that the fuel range problem is related to a missing calibration of the fuel level.
I just don't know how to do it.

[isma123]

when yoiu set calibration as 4WD when it isn't you get that problem check coding datas

[nirv]

when yoiu set calibration as 4WD when it isn't you get that problem check coding datas

That is correct, when you code the cluster to 4WD in a 2WD car, the fuel gauge will not display the correct level on the tank.
But that is not the problem I am experiencing since the cluster is coded to 2WD in a 2WD car and the fuel gauge is showing the correct fuel level on the tank.
Even in the VCDS Measuring Blocks, the liters are shown correctly.

I believe that the problem is related with this Adaptation channels:

Channel 030 - Tank Characteristic (Fuel Level Sensor 1)
This is a parallel shift of the tank characteristic.

Channel 032 - Tank Characteristic (Not detactable Tank Volume)
The tank volume which is not recordable by the fuel gauge sender(s).

Channel 033 - Tank Characteristic (Full Calibration)
Non-parallel shift of the tank characterictic above a readout of 1/2.
To start the adaptation enter '65535' as new value.

Channel 034 - Tank Characteristic (Additional Functions)
Full Correction Sensor 1
1 - active / 0 - not active

I am almost shore that the solution for the fuel range issue can be solved with this Adaptation channels, I just don't know the procedure.
I will try to make the procedure described on the Channel 030 when the tank is full and see what happens...

[amigokola]

Someone knows how to solve this 2000km issue ?? I got car after someone tried to start it with week battery.
Did all adaptations and dash is working but only 2000km problem left.
Thank's in advance.

[armi]

i have the same problem- 2000 km to empty, starts after weak battery starting. Car is Audi A4 2,4 2002. cluster 8E0920930R , all other cluster and FIS functions is OK.
Can someone , who have car with correctly working distance to empty function post here cluster bin? We can compare eeproms, and may be find difference and solution.
I see many people search for solution for years but without success.

[armi]

i have the same problem- 2000 km to empty, starts after weak battery starting. Car is Audi A4 2,4 2002. cluster 8E0920930R , all other cluster and FIS functions is OK.
Can someone , who have car with correctly working distance to empty function post here cluster bin? We can compare eeproms, and may be find difference and solution.
I see many people search for solution for years but without success.

Solved!
Now the Audi A4 RB4 cluster shows correct km to empty, not always 2000km! If someone interested, I"ll write what I did.

[cenick]

Hello, Can you please write what was the solution for solving the 2000 km autonomy problem?
Thanks in advance.

[armi]

I send PM.

[nirv]

Meanwhile I changed the instrument cluster (for the S4 btw) so I solved the problem…
But it is great if you can share with us all what you did.
Thank you

[sholim1987]

Hello armi, Can you please write what was the solution for solving the 2000km problem? I also have same model of cluster 8E0920930R.
Thanks in advance.

[armi]

I send PM.

[bilece1986]

hello armi I have the same problem, could you tell me how you solved it? thank you

[armi]

I send PM.

[Marsele]

Hello armi, could you help me with this problem too? I have been struggling with this figure of 2000 km for three years now. I'm happy with everything in my car, but this annoying oversight haunts me...
Sorry for my English.

[autopiotronik]

Hello Armi. Can I ask you to send a solution with a range of 2000 km.

[karl Martin]

Solved!
Now the Audi A4 RB4 cluster shows correct km to empty, not always 2000km! If someone interested, I"ll write what I did.


Hello. Can you please help me with this issue?
Manyy thanks

[armi]

I sent PM.

[Serg7826]

armi, I have a problem with mileage 2000 on an Audi A4B6. I know you can help. Help if you can, I will be very grateful.
I can't send you a private message, it gives an error that your mailbox is full.

[armi]

armi, I have a problem with mileage 2000 on an Audi A4B6. I know you can help. Help if you can, I will be very grateful.
I can't send you a private message, it gives an error that your mailbox is full.

You can send message now.