PDA

View Full Version : DPF Remove for Passat CC ECU EDC17CP14



Aniskey2
31st July, 2013, 01:01 PM
Hi all Dk member attached is dump for ECU passat CC EDC17CP14 i need dump with removed DPF and correct checksums i have try with winols 2.24 like instructions here https://sites.google.com/site/vagecumap/14-finding-dpf-switch-in-edc17-ecu MPPS V5 stop writing at 64% and tell me checksum error when i write original it success
original dups and two modied are attached
please can someone help me211795

ominimicu
31st July, 2013, 01:45 PM
Mate mpps and edc17...are not very good friends...it s a tricore ecu. You need a better tool to read flash, post it..and DPF is just 1byte away from OFF!

icezero2010
31st July, 2013, 01:49 PM
make the change without chk and than let do mpps the chk . some tools have Problems with the chks from winols or other tools.

Aniskey2
31st July, 2013, 02:00 PM
I'll try the chk of mpps i think this is better

arvedo
31st July, 2013, 02:05 PM
galletto v2 use another tool like it has to work

Aniskey2
31st July, 2013, 02:34 PM
arvedo i have only AVDI original and MPPS clone, i have buy galetto v2 from ecutool.com it doesn't work for me thnx
so only tool that i can used is MPPS

ominimicu
31st July, 2013, 03:20 PM
why wont it work?

Aniskey2
31st July, 2013, 10:46 PM
it stop wrinting at 64% and tell me checksum error when i rewrite original dump it success writing

ominimicu
31st July, 2013, 11:31 PM
Put ecu in boot mode and read...as shown in galletto 2 PDF

786mo
1st August, 2013, 12:22 AM
Use my file, see attached.

Password in PM. Chksum ok.