Ford Galaxy 2.3 petrol 1998, what transponder use?

[ziko]

Hi

Need info what transponder use, is it 4C or maybe id42 or id33?
Can I adapt key with TCode or SBB, because tango and other tools not support this immo, there is no some eeporm or known mcu inside

[gwee]

----------------------------------

[gwee]

fffffffffffffffffffffffffffffffffffffff

[ziko]

Are you sure? Its recognized as pats 3 system
If id33, can I use used golf3 id33?
Or generate id33 with tango, but for mazda, ford not exist

[gokey]

check ECU.

[keysph]

First of all this car is a Volkswagen system. What show you that it's PATS 3???
With SBB you must be able to program a chip. If you can't you must look for the immobox or the ECU behind the dash and i'm sure tango has it.
You can prepare ID 33 for VAG or ID 42.

[ninja123]

this car is a real bitch to program keys via obd, better get immo box from above clutch pedal and do via HC05 mcu eeprom if ID33, or TMS if ID42.

ninja

[ziko]

If you see image above you will see no any eeprom or Motorola mcu. That's why I ask for help. Also same problem had several people in tango forum with same immobox. And in ecu not have immodata, ecy us same as ford KA but on place where should be Tmd mcu, here is missing that part.
I will generate id44 and will try eith tcode, but nit same process as VAG cars.
Tcode connectcas pats 2 but then can't clean pats, shows some numbers in screen, as pats3 clear ok even I not sure is it ok.

Thanks

[ninja123]

i think you have wrong box mate!! This car is not a ford, it is a vw, there is no pats on this car, just a vw system thats been tweaked a bit.

ninja

[ziko]

immobox from image in my first post
Solved with TCode and id42 transponder
Thanks to all