PDA

View Full Version : DM800 + OpenPli problem



hitman000
2nd August, 2013, 12:44 PM
Hey guys I've just bought a USB wifi dongle off eBay and trying to connect the dreambox to the internet, the dongle is seen by the box and the correct driver is installed rt3070 but when going to scan for networks it just says "No networks found! Searching..." I've enabled the interface and filled in the network settings to no avail. Just wondering if I am missing something? Tried the dongle on the PC beforehand and works straight away.

Using the image: OpenPLi-2.1-beta-dm800-DAILYBUILD by gjstroom

Cheers, Dan.

hitman000
5th August, 2013, 12:20 AM
Nobody shed any light on this? Here are some screens... I'm puzzled lol.

http://thumbnails108.imagebam.com/26891/d7c3a6268900676.jpg (http://www.imagebam.com/image/d7c3a6268900676) http://thumbnails104.imagebam.com/26891/95ee71268900682.jpg (http://www.imagebam.com/image/95ee71268900682) http://thumbnails106.imagebam.com/26891/d54457268900684.jpg (http://www.imagebam.com/image/d54457268900684)

:blue:

andy91
5th August, 2013, 09:35 AM
The router is probably your problem. What router are you using? Andy.

blueflash234
5th August, 2013, 11:15 AM
you will have to access your router page normally 192.168.1.1 put you password in log in, there will be a page that tels you whats connected, check to see that the router sees it, has your router wireless been set up for wireless it may be switched off.
i woud imagin that you would need to go into somewhere on your dm and set up the sid and password

digicon
5th August, 2013, 12:40 PM
As Both Andy and Blueflash have stated everything points to the router as it is not assigning the adaptor an IP address, As Stated enter the router config and first thing to try is switch the wireless off/on and try without any encryption to see if it assigns the DM an IP address and work up from that

gji25
8th August, 2013, 06:32 AM
also a very important thing.... have you got a wireless router ?

hitman000
8th August, 2013, 02:00 PM
Thanks for the replies guys, I have a Dlink DIR-615 wireless N router with DD-WRT flashed onto it. Tried with security disabled, WEP only etc and still no joy. Guessing it just doesn't like the dreambox. Tried a few different images also including DBUK 2.1.2.

Cheers.

digicon
8th August, 2013, 03:26 PM
Can you try the USB dongle in another device and see if it connects then just to rule out the possibility of a faulty adaptor

hitman000
8th August, 2013, 03:38 PM
Can you try the USB dongle in another device and see if it connects then just to rule out the possibility of a faulty adaptor

Tried it on my PC mate and it works spot on. :) - I thought it might have been a driver issue so i removed rt3070 drivers and used rt2870 from TS Panel - With both drivers it's the same, it knows the adapter is there and is installed but refuses to scan or manually connect to my network.

This is the Hardware ID in windows: USB\VID_148F&PID_3070&REV_0101

Dan.