BPL Channels on MVHD 800C VI Wifi

[Kikino]

Hi forumers any of you guys face any problem watching BPL channels? For Eg. Lag, Freeze, Intermittent etc.? Not sure whether this channels already stable. Tried to flash but still the same. Or any latest software to share?Thanks

[xodren]

FYHD series boxes able to receive BPL channels alr?

[croc]

mine can't

[jack_diniro]

Same.. Prob need a new firmware upgrade.


mine can't

[moronicgenius]

I use hd800c-vi can get b p l. just manual scan with freq and 6090 symbol rate and u shld get it. some channels are not stable yet only 229,230&231 stable. the issue shld be their end so dun worry coz they shld b ironing out any glitches by this fri coz charity s coming this sat.

[Kikino]

Do manually on S/R 6090 FreQ. 135.50 for CH(226-228), 128.50 CH(229 - 231) & 149.50 CH(232 & 233).Hope this help..

[croc]

problem is i can't do .5....

[outerho]

mine can't

I don't have any problem , just do manually

[croc]

Tried manual n auto
Same cannot get

[croc]

I use hd800c-vi can get b p l. just manual scan with freq and 6090 symbol rate and u shld get it. some channels are not stable yet only 229,230&231 stable. the issue shld be their end so dun worry coz they shld b ironing out any glitches by this fri coz charity s coming this sat.

Charity shield is this sun n exclusive on mio sports only

[moronicgenius]

Yes can't watch CS this sun. you receive 226-228 ok? my pic quality is good but not running smooth freeze every few sec.
Charity shield is this sun n exclusive on mio sports only

[lemuelkoh]

hmm i cant receive 226-228 at all, other channels can

[almar01sg]

something the channel go to last few channel of the box. around channel 1098

[Orichi]

Able to get 229 and 230 smoothly which is the first channel of m-i,o , the rest are unstable which sometime can hear and most of the time cannot see

[hockheng]

fyhd MHD



http://www.singapore-dreambox.com/lastest-firmware-for-mvhd-fyhd-tnhd-white-and-black-box/

[Kikino]

For those who has problem watching BPL channels on MVHD VI .
What I did.
Reset factory setting."Yes"( MVHD VI Model )
Page will reload to menu page.
Do manual scan one at a time.Continously without exit the page.QAM 256
13500/6090 PG 226 -228(This FreQ.works well on this model)
12850/6090. PG 229 -231
14950/6090. PG 232 -233
Exit that page and go to Channel List Page and "Delete All"
Lastly Auto Scan to search for all channels.
The channels number will be in sequence.
Do it step by step and you won't go wrong
Hope this help.Enjoy..

[kangjihh]

For those who has problem watching BPL channels on MVHD VI .
What I did.
Reset factory setting."Yes"( MVHD VI Model )
Page will reload to menu page.
Do manual scan one at a time.Continously without exit the page.QAM 256
13500/6090 PG 226 -228(This FreQ.works well on this model)
12850/6090. PG 229 -231
14950/6090. PG 232 -233
Exit that page and go to Channel List Page and "Delete All"
Lastly Auto Scan to search for all channels.
The channels number will be in sequence.
Do it step by step and you won't go wrong
Hope this help.Enjoy..


hi bro, may i know what fw are u on?

[hobbito]

thanks bro this works. the problem frequency is 13500mhz. it should not be 13550mhz, else the picture will be distorted.


For those who has problem watching BPL channels on MVHD VI .
What I did.
Reset factory setting."Yes"( MVHD VI Model )
Page will reload to menu page.
Do manual scan one at a time.Continously without exit the page.QAM 256
13500/6090 PG 226 -228(This FreQ.works well on this model)
12850/6090. PG 229 -231
14950/6090. PG 232 -233
Exit that page and go to Channel List Page and "Delete All"
Lastly Auto Scan to search for all channels.
The channels number will be in sequence.
Do it step by step and you won't go wrong
Hope this help.Enjoy..

[Kikino]

Hi im using...( SCV_HDC3000L_M_L1.1_V2.5.0_CID-21009 )
Using diff FW can cause ur set to hang and lost of signals.Cant detect any channels when Auto Scan.
Beware always check with your agent or seller before upgrade and flash..

[jamal_jantan]

For those who has problem watching BPL channels on MVHD VI .
What I did.
Reset factory setting."Yes"( MVHD VI Model )
Page will reload to menu page.
Do manual scan one at a time.Continously without exit the page.QAM 256
13500/6090 PG 226 -228(This FreQ.works well on this model)
12850/6090. PG 229 -231
14950/6090. PG 232 -233
Exit that page and go to Channel List Page and "Delete All"
Lastly Auto Scan to search for all channels.
The channels number will be in sequence.
Do it step by step and you won't go wrong
Hope this help.Enjoy..

Yes,
I agreed the above information. I have done on my MVHD box.
Doing fine till yesterday nite.

[sinhwa]

I flashed the firmware to (SCV_HDC3000L_M_1.1_V2.5.0_CID-21009). I think I bricked the MVH 800c-vi wifi box, cannot switch on anymore, always on standby mode, it was previously on v2.4.5. It is the correct box and nothing went wrong during the flashing. Any recovery method for this?

[Kikino]

I flashed the firmware to (SCV_HDC3000L_M_1.1_V2.5.0_CID-21009). I think I bricked the MVH 800c-vi wifi box, cannot switch on anymore, always on standby mode, it was previously on v2.4.5. It is the correct box and nothing went wrong during the flashing. Any recovery method for this?
Did you reset factory setting before you upgrade/flash? Your firmware looks different with no L1.1... Not sure with or without L plays apart..
Try manual OFF and ON by Controller.. Not working?
Try hold the power button for few secs then power OFF from the power supply, then ON again.. Still not working?
Send back to Agent..

[sinhwa]

Did you reset factory setting before you upgrade/flash? Your firmware looks different with no L1.1... Not sure with or without L plays apart..
Try manual OFF and ON by Controller.. Not working?
Try hold the power button for few secs then power OFF from the power supply, then ON again.. Still not working?
Send back to Agent..

it's with L1.1, typo. firmware is same.

I didn't reset to factory setting before flashing. Didn't know need to do that.

[Starfug]

I am unable to scan channel 232 and 233 with freq 14950 Any idea why? Any gurus can help?

[viperjet]

I am unable to scan channel 232 and 233 with freq 14950 Any idea why? Any gurus can help?

Same here... manage to get 226 to 231 but unable to get 232 and 233... anyone can advice?

[Kikino]

Try to follow post #16.... It happened to me when i do this steps all back to normal.. Good luck guys!!
Happy watching!!

[Andylim80]

Hi Guys i just bought the MV HD 800C-VI one month ago.At first the mio bpl channel are working fine.But suddenly this few days all the mio bpl channel can't watch...when even i switch from a working channel to bpl channel it hang there with a small square blue logo with a word(scrambled).any one know what happen?I try #16 method but it didn't work...Please help!!!

[eskedumdes]

I think they block the signal already.. haiz.. watch at coffeshop from now on..

[moronicgenius]

yes N3 oledi other channels following soon... enjoi while it last

[DBTraitor]

Those using dreambox and Q5 will not have these issues
Now you know why cannot anyhow buy box
Other clones are not the way they claim it to be

[Joey Apitson]

so mvhd soon no channels?

Sent from my GT-P1000 using Tapatalk 2

[novaol]

Well not only that but all DreamBox or boxes in the market will face the same faith. SH has set in motion to switch to N3 and progressively will see less and less channels be able to viewed on the boxes


so mvhd soon no channels?

Sent from my GT-P1000 using Tapatalk 2