audi a6

[blazej1200]

Hi all. The audi a6 3.0 tdi edc16cp34 dpf removed (switch), I did reset the content of carbon black in the eprom ecusafe, and after driving 40-50 miles show me the error P0606 (ECM component damaged). What is wrong?

[Diagnosticated]

Post original and modified files to look.

[blazej1200]

Here are the files

[icezero2010]

the chk are wrong from eeprom and from flash and the car was tuned . is it a manual or automatic?

[blazej1200]

Yes you're right cheksum the EEPROM is bad car it can not start. Later bdm write again, and finally made entirely cheksum . Car starts, drivin well , after 50 km shows the error p0606 , Automatic transmission , I do not know if the car was tuned , with vcds, vag can pro and VAS5054 I could not reset the contents of soot or make replacement dpf . therefore I did it ecusafe (sorry for the english google translator)

[icezero2010]

Yes you're right cheksum the EEPROM is bad car it can not start. Later bdm write again, and finally made entirely cheksum . Car starts, drivin well , after 50 km shows the error p0606 , Automatic transmission , I do not know if the car was tuned , with vcds, vag can pro and VAS5054 I could not reset the contents of soot or make replacement dpf . therefore I did it ecusafe (sorry for the english google translator)

correct CHK eeprom+flash and original only DPF

[blazej1200]

Thank you for your help on Tuesday to write and test later a report Hi, the car driven 1300 km far everything is ok . Thanks