View Full Version : audi a6
blazej1200
9th August, 2013, 11:00 PM
Hi all. The audi a6 3.0 tdi edc16cp34 dpf removed (switch), I did reset the content of carbon black in the eprom ecusafe, and after driving 40-50 miles show me the error P0606 (ECM component damaged). What is wrong?
Diagnosticated
10th August, 2013, 10:57 AM
Post original and modified files to look.
blazej1200
10th August, 2013, 11:48 AM
Here are the files
icezero2010
10th August, 2013, 12:51 PM
the chk are wrong from eeprom and from flash and the car was tuned . is it a manual or automatic?
blazej1200
10th August, 2013, 05:19 PM
Yes you're right cheksum the EEPROM is bad car it can not start. Later bdm write again, and finally made entirely cheksum . Car starts, drivin well , after 50 km shows the error p0606 , Automatic transmission , I do not know if the car was tuned , with vcds, vag can pro and VAS5054 I could not reset the contents of soot or make replacement dpf . therefore I did it ecusafe (sorry for the english google translator)
icezero2010
11th August, 2013, 04:42 PM
Yes you're right cheksum the EEPROM is bad car it can not start. Later bdm write again, and finally made entirely cheksum . Car starts, drivin well , after 50 km shows the error p0606 , Automatic transmission , I do not know if the car was tuned , with vcds, vag can pro and VAS5054 I could not reset the contents of soot or make replacement dpf . therefore I did it ecusafe (sorry for the english google translator)
correct CHK eeprom+flash and original only DPF
blazej1200
11th August, 2013, 08:15 PM
Thank you for your help on Tuesday to write and test later a report Hi, the car driven 1300 km far everything is ok . Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.