PDA

View Full Version : SANG YONG REXTON 2007 DIESEL IMMO OFF



achaccha
14th August, 2013, 12:22 PM
Dear Friends.
I have a vehicle SANG YONG REXTON 2007. the vehicle has problems with the immobilizer. I need your help to make the ecu immo off A665 540 01 32, was read the eeprom 95160.
thanks for your help mate.
regards

tmkz
14th August, 2013, 12:26 PM
hi, try this...

achaccha
14th August, 2013, 02:44 PM
Dear Tmhz.
has tested the file I posted, but the engine does not work.
I hope someone can help with this ECU immo OFF.
I understand you have to be immo off the same file from my ECU. otherwise not working.
thanks for your help

Lexas
14th August, 2013, 06:27 PM
Here you go, your dump immo off, try and report, IMPORTANT - First disconnect immo box, then plug in ecu. pass PM

achaccha
15th August, 2013, 03:53 AM
Dear Friend.
thank you very much for your support. the engine ripped and is working, only immo light is on constantly even though the immo is offline. is scanned and engine tells me immo disabled as fault code. I will continue analyzing step by step the result, I will be reporting the results.
thanks once more
regards

Lexas
15th August, 2013, 09:27 AM
Thank you for report

achaccha
19th August, 2013, 06:12 PM
Dear Friend
After 4 days of run well with the immo off now will not start the engine.
I await your prompt help. i post new file not start
thanks

Lexas
20th August, 2013, 12:38 AM
try this different solution

achaccha
22nd August, 2013, 09:49 PM
Hello Friends
I still have this problem, we have tried to use the file sent by Lexas immo off, but after a few days nuevamante the immobilizer is activated.
anyone can help with disable the immo to this file?
thanks for your help

almlohe
22nd August, 2013, 10:20 PM
I tried hard in the past so much work for one day and then go back and closed
That you come to the result Please advise...

achaccha
23rd August, 2013, 04:54 PM
I have tried other files immo off of this forum. the engine and starts but turn on the check engine light on the dashboard. to scan out code P1622 (ECU failure) and the engine does not accelerate.
anyone can help me please. I need a file immo off ok
thanks for your help

Lexas
23rd August, 2013, 11:23 PM
Try one more time friend, if no, im out of solutions...

ADUIR
19th August, 2014, 07:36 PM
please; password

mondis
10th September, 2014, 08:00 AM
please; password I have tried other files immo off of this forum. the engine and starts but turn on the check engine light on the dashboard. to scan out code P1622 (ECU failure) and the engine does not accelerate.
anyone can help me please. I need a file immo off ok
thanks for your help

Lexas
10th September, 2014, 08:41 AM
dumps from other car not fit for you. upload your dump and someone will do.