Signal & quality strength poor?

[Steve F]

Any advise plz. When TP channel scanning/update i.e. HD channels to AJs list the TP has less than 45% signal & quality. The scan does not find any channels in fact the frequency is correct on the channel list? Is it possible to have 95% of list @ 85% and get 5% poor signal & quality off certain transponders? The channels are available in SD (deferent freq). Is this common, what might be the possible cause, is there anything to remedy the problem? Has anyone experienced fluctuating TP signal? Thanks for your comments

[rjuk88]

is your dush positioned correctly?

[P&D]

Hi is this an F5 box ???
do you have a sly box connected at the same time ??

maybe this could be your problem...http://www.digital-kaos.co.uk/forums/f184/no-signal-fix-skybox-f3-338684/

[Steve F]

Hi Guys sorry for the delay..... (back at work) Firstly it is a F5 and it is the only box connected. I believe the alignment is good because all other channels/transponder signal and strength are excellent approx 95% of AJs list. The tp freq is correct on the list, but when I rescan the transponder I get a weak signal 43% and "no channels are found" Thanks P&D for the link, is it possible to get weak signal strength from certain transponders? before the update the channels were fine when receiving from the old transponder. Maybe a signal boost would increase the signal & quality? what do you think?